Xiaomi Redmi 7 is one of the most popular budget smartphones of 2019, which is still actively used due to its balanced characteristics. But over the years, even reliable devices begin to lose their former charge: the battery goes down faster, the phone overheats, and autonomy leaves much to be desired. If you are wondering how much battery Redmi 7 has, this article will give a comprehensive answer, and also tell you how to maximize the life of the battery.
We will analyze not only the official specifications, but also real tests of autonomy, compare with competitors (for example, Redmi Note 7 or Samsung Galaxy). A10), We will also give practical tips on diagnosis and care, and pay special attention to the typical problems that owners face after 2-3 years of operation: sudden shutdowns with 20-30% charge, slow charging and โbloatingโ the battery.
Spoiler: The original Redmi 7 battery capacity is 4,000 mAh, but after 500 charging cycles, it loses up to 20 to 25 percent of its original capacity.
Official Battery Specifications Xiaomi Redmi 7
According to the manufacturerโs specifications, the Xiaomi Redmi 7 is equipped with a lithium polymer battery with a capacity of 4000 mAh. This is one of the key arguments in favor of the model: at the time of release (March 2019), such figures were rare in the budget segment, for comparison, competitors offered:
- ๐ฑ Samsung Galaxy A10 โ 3400mAh
- ๐ฑ Huawei Y6 2019 - 3020 mAh
- ๐ฑ Realme 3 โ 4230 mAh (but it cost 20-30% more)
Technical features of the Redmi 7 battery:
- ๐ Type: Li-Po (lithium-polymer)
- ๐ Voltage: 3.85 V
- โก Support for fast charging: No (maximum) 10 Watt through a standard adapter 5V/2And)
- ๐ Number of charging cycles before 20% capacity loss: ~500
It's important to understand that the 4,000 mAh is the nominal capacity, and the actual energy available depends on:
- ๐ Battery wear (the more charging cycles, the smaller the residual capacity).
- ๐ก๏ธ Operating temperatures (at โ10ยฐC capacity drops 30-40%).
- ๐ฎ Loads (games, videos, GPS Eating a charge 2-3 times faster than reading or calling).
โ ๏ธ Warning: If your Redmi 7 suddenly turns off at 20 to 30 percent charge, it's a sign of critical battery wear, and then the battery capacity could drop to 2,500 to 3,000 mAh, and a replacement is required.
Real autonomy: tests and user reviews
The manufacturer claimed that the Redmi 7 could last up to 2 days in moderation, but in practice it depends on the scenario.
| Use case scenario | Opening time (screen) | Notes |
|---|---|---|
| Reading, messaging, calling. | 10-12 hours | At 50% brightness, mobile data 4G |
| Social media, YouTube | 6-8 hours | Video in the video 720p, Wi-Fi |
| Games (PUBG, Genshin Impact) | 3-4 hours | Maximum brightness, body temperature +40ยฐC |
| Standby mode (no activity) | 3-4 days | When it's off. Wi-Fi/mobile |
According to GSMArena, Redmi 7โs battery life test showed 14 hours 27 minutes, the average for a 2019 budgeter. In comparison, the 4000mAh Redmi Note 7 lasted 16 hours thanks to the more energy-efficient Snapdragon 660 processor.
User reviews on forums (4PDA, Mi Community confirms:
- ๐ In the first 6-12 months, the smartphone easily โlivesโ until the evening with active use.
- ๐ After 2 years, the capacity drops to 3000-3500 mAh, and 1-2 rechargings per day are required.
- โก Charging from 0 before 100% borrower ~2.5 hour (standard adapter) 5V/2And).
How to check the real capacity of the Redmi 7 battery
If you suspect that your Redmi 7 battery is worn out, you can check it without disassembling the device.
1. Through the engineering menu (code ##4636##)
Open the phone application and enter the combination:
##4636##Go to the Battery Information tab. Pay attention to the parameters:
- Level of charge is the current percentage.
- Voltage - should be 3.7-4.2 V.
- Temperature (optimal 25-35)ยฐC.
If the voltage at 100% charge is below 4.1 V, and at 50% - below 3.8 V, this is a sign of wear.
2.AccumBattery (Play Market) application
AccuBattery is one of the most accurate applications for battery diagnostics.
- Charge your phone to 100% and turn off charging.
- Use your smartphone in normal mode up to 20-30%.
- Open AccuBattery and check the Health section.
The annex will show:
- ๐ Residual capacity (e.g. 3200 mAh instead of 4,000 mAh).
- ๐ Number of charging cycles.
- โก Discharge rate in mAh/h.
Visual inspection (during disassembly)
If you are looking to open Redmi 7, please note:
- ๐ Battery bloating โ if the battery case is swelling, it needs to be replaced urgently!
- ๐ Labeling: The original battery has an inscription HB4163H4ECW or DM-BH30.
- ๐ Thickness: normal battery - 3.5-4 mm, bloated - from 5 mm.
โ ๏ธ Warning: If the battery is swelling, you can't puncture it or keep using it! Risk of fire or explosion.
โ๏ธ Diagnostics of the Redmi 7 battery
Xiaomiโs Comparison with Other Models: Who Holds Longer?
To see how good the Redmi 7 battery is, compare it to other popular Xiaomi models from 2018-2020:
| Model | Capacity (mach) | Processor | Autonomy (screen) | Fast charging. |
|---|---|---|---|---|
| Redmi 7 | 4000 | Snapdragon 632 | 6-8 hours | No (10 watts) |
| Redmi Note 7 | 4000 | Snapdragon 660 | 8:10 hours | Yes (18 watts) |
| Redmi 8 | 5000 | Snapdragon 439 | 9-12 hours | Yes (18 watts) |
| Redmi 9 | 5020 | Mediatek Helio G80 | 10:14 hours | Yes (18 watts) |
As you can see from the table, Redmi 7 loses to newer models in two key parameters:
- No fast charging โ even the Redmi Note 7 charges 1.5-2 times faster.
- Less energy efficient processor โ Snapdragon 632 is inferior to Snapdragon 660 in power optimization.
In its price segment (about 10 000). โฝ Redmi 7 was one of the leaders in autonomy. A10 3400mAh battery in the same tests showed 30-40% worse results.
Why does Redmi 7 run out faster in winter?
Typical Redmi 7 battery problems and solutions
After 2-3 years of operation, Redmi 7 owners face typical battery problems.
1. Fast discharge (the battery goes down in 2-3 hours)
Reasons:
- ๐ Battery wear (capacity dropped below 2,500 mAh).
- ๐ค Background activity of applications (especially Facebook, Instagram, instant messengers).
- ๐ก Bad network signal (the phone spends a lot of energy searching for a connection).
Decisions:
- ๐ ๏ธ Calibrate the battery: completely discharge the phone, then charge to 100% without interruptions.
- โ๏ธ Turn off auto-update apps in Settings โ Annexes โ Autoboot.
- ๐ถ Enable Traffic Saving Mode in Settings SIM-map.
2. the phone turns off at 20-30% charge
This is a classic symptom of a power controller miscalibration or critical battery wear.
- Reset the settings to factory settings (Settings โ Additional โ Recovery and Reset).
- Use the AccuBattery app to recalibrate.
- If it doesnโt work, replace the battery (cost) ~1 500 โฝ).
3. Slow charging (more than 3-4 hours)
Possible causes:
- โก Use of non-original cable/adapter.
- ๐ Pollution of the microUSB port (dust, contact oxidation).
- ๐ Battery wear (increases internal resistance).
How to speed up charging:
- ๐ Clean the microUSB port with a toothpick and alcohol.
- โก Use the 2A adapter (for example, from Redmi Note 4).
- ๐ต Turn on Flight Mode during charging.
โ ๏ธ Warning: If the phone is heated above 45ยฐC during charging is a sign of a battery or power controller malfunction!
๐ก
To extend the life of the battery, avoid charging to 100% and discharging to 0%. The optimal range is 20-80%.
How to extend the life of the battery Redmi 7: 7 practical tips
Even if your Redmi 7 isnโt new, these tips will help slow battery degradation and improve battery life.
- Use original or certified ROM Non-original chargers with unstable voltage accelerate battery wear. 5V/2And (10 Watt).
- Avoid extreme temperatures: Do not leave your phone in the sun (above 35)ยฐC) or in cold (below) โ10ยฐC. Optimal operating temperature: 10โ30ยฐC.
- Turn off unnecessary background processes Go to Settings โ Battery โ Battery use and limit the activity of "gluttonous" applications.
- Turn on the dark theme and adaptive brightness on Redmi 7s IPS-This gives an increase in autonomy up to 10-15%.
- Update the firmware MIUI regularly optimizes energy consumption. Up-to-date version at the time of the article โ MIUI 12.5 (Android 9).
- Store your phone with 40-60% charge If you do not use your smartphone for a long time (for example, during a vacation), discharge it to 50% and turn it off.
- Check the battery health once every 3 months Use AccuBattery or an engineering menu to track degradation.
Following these tips, you can extend the life of the battery by 20-30%, for example, with careful operation, the Redmi 7 battery can last 4-5 years instead of the standard 2-3 years.
๐ก
The most effective way to extend autonomy is to limit the background activity of applications and use adaptive brightness.
Redmi 7 battery replacement: the cost, where to buy, instructions
If the battery capacity has dropped below 2500-3,000 mAh, and the phone turns off at 30% charge, it's time to think about replacing.
1 Cost and Where to Buy
Battery prices for Redmi 7 (model) DM-BH30):
- ๐ Original battery: 1,200โ1,800 โฝ (in Xiaomi's branded services).
- ๐ Analogue (quality): 800โ1,200 โฝ (on AliExpress, Beru).
- ๐ Counterfeit (low quality): 500-700 โฝ (risk of swelling after 3-6 months).
Where to buy:
- ๐ฌ Xiaomi Service Centers (6 Months Warranty).
- ๐ AliExpress (sellers rated 98%+, compatibility).
- ๐ ๏ธ Local workshops (check reviews!).
2. Step-by-step instructions for replacement
If you are replacing the battery yourself, you will need:
- ๐ง Screwdriver Set (Phillips #00, Y00).
- ๐งฒ Screen suction cup.
- ๐ฅ Fryer (for softening glue).
- ๐ก๏ธ Plastic blades (so as not to damage the plumes).
Procedure:
- Turn off the phone and remove it. SIM-map.
- Heat the back cover with a hair dryer (1-2 minutes) and put it under a plastic spatula.
- Unscrew 10 screws holding the metal plate.
- Disconnect the battery plume (carefully, don't damage the contacts!).
- Put a plastic spatula on the battery and remove it.
- Install a new battery, assemble the phone in reverse order.
โ ๏ธ Warning: If you replace yourself, you lose your warranty (if it is still valid) and risk damaging your screen or camera plumes.
3. How to check a new battery
After replacement:
- Fully charge your phone (up to 100%).
- Use it in normal mode until discharge to 0%.
- Repeat the cycle 2-3 times to calibrate the controller.
- Check the capacity through AccuBattery โ it should be close to 4000 mAh.