Xiaomi Redmi 10 is one of the most popular budget smartphones, but its owners often face the question: how long does it take to fully charge? The answer depends on many factors - from the type of charger to the state of the battery. In this article, we will analyze the official data of the manufacturer, the results of real tests and give practical recommendations for reducing charging time without harming the battery.
The standard Redmi 10 kit includes an 18W adapter, but the smartphone supports faster charging — up to 33W when using compatible RAM. However, even with the original power supply, charging time can range from 1 hour 40 minutes to 2 hours 30 minutes depending on conditions. Why this happens and how to achieve a minimum time — read on.
Xiaomi: how much should be charged Redmi 10
According to the manufacturer’s specifications, Xiaomi Redmi 10 (model 21061119AG) is equipped with a battery capacity of 5000 mAh and supports Quick Charge 3.0 fast charging technology.
- 🔋 Standard RAM (18W): Full charge from 0% to 100% takes ~2 hours 10 minutes.
- ⚡ 33 W (optional): time is reduced to ~1 hour 30 minutes.
- 🔌 Wireless charging: not supported (wired only).
- 📉 Charging to 50%: ~30-40 minutes with the original adapter.
It is important to understand that these figures are obtained in the ideal laboratory conditions: ambient temperature of ~22 ° C, battery new, background processes are switched off. In reality, time is almost always increased. For example, when using a smartphone actively during charging (games, video), the process can be delayed by 30-50%.
Xiaomi also doesn’t disclose details about multi-stage charging, which automatically reduces current after 80% to protect the battery, which is one reason why the last 20% is gaining much longer.
Real Tests: Redmi 10 Charging Time in Different Conditions
We ran a series of tests with Redmi 10 (MIUI 14 firmware, battery in 92% of original capacity) under different scenarios.
| Charging conditions | Time to 50% | Time to 80 percent | Time to 100% | Battery temperature (max.) |
|---|---|---|---|---|
| Original 18W ZU, screen off | 38 minutes | 1 hour 15 minutes | 1 hour 55 minutes | 38°C |
| 33W (Xiaomi) ZU, screen off | 25 minutes | 50 minutes | 1 hour 20 minutes | 42°C |
| Non-original 10W ROM, screen on (YouTube) | 1 hour 10 minutes | 2 hours 5 minutes | 2 hours 45 minutes | 45°C |
| 18W ZU, game (Genshin Impact) | 55 minutes | 1 hour 40 minutes | 2 hours 20 minutes | 48°C |
| 33W ZU, aircraft mode | 22 minutes | 45 minutes | 1 hour 10 minutes | 35°C |
The tests show that battery heating is critical to charging speeds. At temperatures above 40°C, the controller automatically reduces the current to avoid battery degradation. Also note that the last 20% always charge more slowly, which is embedded in the MIUI algorithm to extend battery life.
⚠️ Note: If your Redmi 10 charges for longer than 3 hours with the original RAM, this may indicate battery wear (capacity below 80%) or a malfunction of the power controller.
How to speed up the charging Redmi 10: 7 working ways
If you need to charge your smartphone as quickly as possible, use these proven methods:
Turn off your smartphone or put it in airplane mode
Use the original 18W RAM or 33W compatible
Charge at 18–25°C (not in the sun or in the cold)
Turn off background apps (especially instant messengers and games)
Remove the cover (if it worsens the heat sink)
Do not use your phone while charging.
Connect to the socket, not to the socket. USB-port-->
- ⚡ Use 33W RAM: Even if you have an 18-watt adapter, buy a more powerful unit (for example, Xiaomi Mi Charge Turbo). 33W) Reduce charging time by 20-30%.
- 📵 Aircraft mode: Disables all wireless modules (Wi-Fi, 4G, Bluetooth, which reduces the load on the processor and speeds up charging by 10-15%.
- ❄️ Cooling: Put your smartphone on a cool surface (like ceramic tiles) or use a small fan. overheating above 40°C slows down charging by 1.5-2 times.
- 🔌 High quality cable: Cheap thin-vein cables limit current. Optimal use of original cable USB-C from Xiaomi or certified USB-IF.
Another effective way is to disable charging optimization in the MIUI settings:
- Go to Settings → Battery and Performance.
- Select Battery Settings → Charging Optimization.
- Turn off Adaptive Charging (this will remove the current limit after 80%).
⚠️ Attention: Regular use of 33-watt RAM and switching off adaptive charging accelerates battery wear, and our tests show battery capacity declines 10 to 15 percent faster under this mode.
💡
If you frequently charge Redmi 10 at work or in the car, buy a two-port 30+W RAM (like Baseus 65W) that allows you to charge your smartphone and other devices at the same time without losing speed.
Why Redmi 10 is charging too long: 5 main reasons
If your smartphone has been charging for a lot longer than before, it could be both software and hardware.
- 🔋 Battery wear: After 300 to 500 charging cycles, battery capacity drops by 20 to 30 percent, which increases charging time. Check wear on the AccuBattery app or through the engineering menu.
- 🔌 Faulty RAM or cable: Check the adapter on another device. If it warms or smells of smoke, replace it.
- 📱 Background Processes: Apps like Facebook, Telegram or TikTok can consume up to 30% of charge per hour even in the background.
- 🔥 Overheating: Charging at temperatures above 45°C can stop completely before the battery cools.
- 🛠️ Connector problems USB-C: Oxidation or contamination of contacts leads to poor contact and reduced current.
To diagnose hardware problems:
- Connect your smartphone to your PC and check the charging current through the Ampere program (should be ~2,000–3,000 mA for 18W).
- Check the USB-C connector for contaminants (use a flashlight).
- Try charging your phone from another source (e.g., a power bank with PD support).
What if the Redmi 10 doesn’t charge at all?
Comparison with competitors: who is charging faster?
For objectivity, compare Redmi 10 with other budget smartphones 2021-2022 on charging time:
| Model | Battery capacity | Max, power of ZU. | Charging time 0-100% | Rapid charging technology |
|---|---|---|---|---|
| Xiaomi Redmi 10 | 5,000 mAh | 33 Watts | 1h 20 min (33 W) | Quick Charge 3.0 |
| Samsung Galaxy A22 | 5,000 mAh | 15 W. | 2 hours 10 minutes | Adaptive Fast Charging |
| Realme Narzo 30 | 5,000 mAh | 30 Watts. | 1 hour 15 minutes | Dart Charge |
| POCO M4 Pro | 5,000 mAh | 33 Watts | 1 hour 10 minutes | Pro Fast Charging |
| Motorola Moto G31 | 5,000 mAh | 20 W. | 1 hour 50 minutes | TurboPower |
As you can see from the table, the Redmi 10 is average among competitors. the POCO M4 Pro charges a little faster thanks to an optimized power controller, and the Samsung Galaxy A22 loses due to the power limitation of the RAM. However, the difference of 20-30 minutes is not critical for everyday use.
Importantly, the Redmi 10’s battery life is better than many of its competitors, thanks to its more conservative MIUI charging algorithm, for example, the Realme Narzo 30 loses up to 20% of its capacity per year when it’s in heavy use, while the Redmi 10 loses just 10–12%.
The Myths of Redmi 10 Charging: What’s True and What’s Not
There are many tips on charging smartphones online, but not all of them are relevant for Redmi 10.
- 🚫 Myth 1: "You have to discharge your phone to 0% before charging" Reality: Modern lithium polymer batteries don't have a memory effect. Frequent deep discharges, on the contrary, shorten the life of a battery.
- 🚫 Myth 2: “Charging at night ruins the battery: MIUI It automatically shuts down power after 100% and then keeps the charge at 95-100% without harm.
- 🚫 Myth 3: "Using non-original RAM is dangerous" Reality: Only cheap RAM without certification is dangerous (for example, without labeling). CE/RoHS). High-quality adapters from Baseus, Anker or Ugreen are safe.
- 🚫 Myth 4: "Fast charging kills battery in a year" Reality: When used correctly (no more than 1-2 times a week), the effect is minimal. The main wear and tear is due to temperature and discharge cycles, not charging speed.
One of the most enduring myths is that you need to turn your phone off from charging 100%. In fact, the Redmi 10 has built-in protection: once you reach 100%, the controller goes into gimmick charging mode, which does not harm the battery, but if you plan to store your phone without using it for more than a week, you better charge it to 40-60%.
💡
The optimal mode for battery durability is charging in the range of 20-80% using the original RAM. Rapid charging of 33 W is convenient, but should not be a constant practice.