How to turn off Xiaomi Power Bank 10000 mAh: all the ways and nuances

Why is it important to turn off Xiaomi power bank correctly?

Xiaomi’s 10,000mAh external batteries are some of the most popular on the market for their combination of compactness and capacity. But many users are faced with a seemingly simple problem: how to turn off the device correctly so as not to shorten its lifespan? It turns out that a wrong shutdown can lead to zero discharge, damage to the controller or even fire (in rare cases).

In this article, we will discuss all the official and hidden ways to turn off the Xiaomi Power Bank 10000 (PLM03ZM, PLM05ZM, PB100ZM and analogues), and explain why some methods can harm. For example, did you know that automatically shutting down after 30 seconds without loading is not always good for lithium polymer batteries?

Before we get into the instructions, we clarify: we are talking about the original power banks Xiaomi (including versions with Quick Charge and USB-C).

Method 1: Turning off the button - the classic method

The most obvious and safe way is to use a physical button. On the boxed versions of Xiaomi Power Bank 10000, it is located on the end next to the charge indicators.

1. Make sure that no devices are connected to the power bank (either via USB-A or USB-C).
2. Press the power button once (do not hold it!).
3. Wait 2-3 seconds – the indicators will go out, which will confirm the shutdown.

⚠️ Warning: If the indicators continue to burn after pressing, then the power bank is in standby mode:

• 🔌 Disconnect all cables (even if they are not connected to gadgets).
• 🔄 Repeat the press of the button in 10 seconds.
• 🔋 If it doesn’t work, plug in a load (like a smartphone) for 5 seconds, then turn it off and try again.

On some modifications (for example, Xiaomi Mi Power Bank 3 Pro) the button can be touch-sensitive, in which case the press should be short and clear – prolonged retention activates the charge level check, not shutdown.

All cables disabled |No active charge devices |Change pressed once (not held) |Indicators gone out within 3 seconds-->

Method 2: Automatic disconnection without load

Xiaomi Power Bank 10000 is equipped with the function of auto-disconnection in the absence of load. By default, the device turns off after 30 to 60 seconds after disconnecting all gadgets, this mechanism protects against accidental discharge, but has nuances:

⚠️ Warning: If you store a power bank with a residual charge of less than 30%, the auto-switch may not work properly and the device will run out:

• 🔋 Charge the power bank to 50-70%.
• 🔄 Turn it off manually with a button.
• 📦 Keep it in a cool place (not in the refrigerator!).

Method 3: Shutting off during charging powerbank

Can you turn off Xiaomi Power Bank 10000 when it's charging itself from the network? Technically, yes, but there are limitations:

If the power bank is connected to the charger (for example, via USB-C), the power button will not work - the controller ignores the commands before the charging cycle is completed.

1. Disconnect the cable from the socket or adapter.
2. Wait 10 seconds, the indicators should go out.
3. If the lights are on, press the power button once.

⚠️ Attention: 80 to 90 percent interruption of the power bank charge (for example, to turn off) can lead to undercharge of the battery. Over time, this reduces capacity. Optimal:

• 🔌 Wait for full charge (all 4 indicators are on).
• 🔄 Turn off the network, then turn off with a button.
• ⚡ Avoid interruption during the balancing phase (blinking 4th indicator).

💡

If the powerbank is warming up while charging, don't force it to turn it off - wait for cooling.Overheating can be caused by high current (QC 3.0 or PD 18W), and abrupt shutdown will exacerbate the problem.

Method 4: Software Disabled (for Advanced)

Some Xiaomi Power Bank models (such as Mi Power Bank 3 Pro) support shutdown on command via USB-OTG or specialized applications.

• 📱 Smartphone with support OTG (PC).
• 🔌 Cable USB-C — USB-C (new-model).
• 🛠 Power Bank Controller (available on the 4PDA).

Instructions:

1. Connect the power bank to the smartphone via OTG.
2. Start the app and select the model (Xiaomi 10000 mAh).
3. In the menu, find the Power Off option.
4. Confirm the command - the device will turn off in 5 seconds.

⚠️ Warning: This method doesn't work on all firmware! Wrong commands can:

• 🔄 Reset the charge cycle counter.
• 📉 Turn off fast charging (QC/PD).
• 🚨 Disable the controller (in 1% of cases).

💡

Software shutdown is only suitable for power users. For normal use, a button or auto-switch is enough.

What to do if the power bank does not turn off?

If Xiaomi Power Bank 10000 does not respond to the button and does not turn off automatically, the reasons may be as follows:

If none of the methods worked, try resetting the settings:

1. Connect the power bank to the charger.
2. Hold the power button for 10-15 seconds.
3. Release - the indicators should flash 3 times (reset signal).

⚠️ Warning: Resets the charge cycle counter and can disable Quick Charge:

• 🔋 Completely discharge and charge the power bank (calibration).
• 🔄 Check the fast charging operation.

How to properly store power bank turned off?

Turning off before storage is a must, but it is equally important to comply with the conditions. For Xiaomi Power Bank 10000, the optimal parameters are:

• 🌡 Temperature: 10-25°C (not in the fridge!).
• 💧 Humidity: less than 60%.
• ☀️ Without direct sunlight.
• 🔋 Charge level: 40-60%.

What can't be done:

• 🚫 Store in a cover or sealed container (condensate risk).
• 🚫 Place near metal objects (risk of contact closure).
• 🚫 Leave connected to the socket for a long time.

If the power bank does not plan to use for more than 3 months, repeat the charging-discharge cycle before storage.This will prevent deep discharge and prolong the battery life.

💡

The ideal charge level for storage is 50%, 100% accelerates battery degradation, 0% - the risk of irreversible damage.

FAQ: Frequent questions about shutting down Xiaomi Power Bank 10000