Why Xiaomi Redmi Note 8 Pro is fast discharged: a full analysis of the causes and solutions

Introduction: real numbers of the Redmi Note 8 Pro

Owners of Xiaomi Redmi Note 8 Pro often face a problem: a smartphone that is supposed to hold a charge for 1.5-2 days, discharges in 5-8 hours of active use, and we are not talking about old devices with a worn-out battery, but about devices aged 1-2 years. What is it?

According to GSMArena tests (2019), the new Redmi Note 8 Pro lost ~15-20% of its charge in 8 hours when it was used on average (social media, instant messengers, 2 hours of video per day). Today, users complain of losing 40-60% in the same period, even without playing or shooting video. It's not just "it should be": the problem has specific causes, some of which can be fixed by themselves.

In this article, we will discuss:

  • πŸ”‹ Hardware causes of rapid discharge (battery wear, board defects, overheating).
  • βš™οΈ Software "holes" in MIUI, squashing the charge in the background.
  • πŸ“± Settings and usage habits that shorten battery life by 30-50%.
  • ⚑ Diagnostics – How to Determine Exactly What Is Drying Your Smartphone.
πŸ“Š How fast your Redmi Note 8 Pro will discharge?
Less than 6 hours.
6-12 hours
12-24 hours
Longer than a day.
I don't know.

Battery wear: when 4500 mAh turns into 3,000 mAh

Redmi Note 8 Pro is equipped with a lithium-polymer battery capacity of 4500 mAh. However, after 300-400 charging cycles (about 1.5-2 years of active use), the real capacity drops by 20-30%. This means that instead of the declared 4500 mAh you get 3200-3600 mAh – like a budget smartphone 5 years ago.

How do you check the wear?

  1. Install the AccuBattery app (free on Google Play).
  2. Charge the phone to 100% and use it to full discharge (until it automatically shuts down).
  3. In the section Battery Health, see the option Design capacity.
Design capacity (mAh)Degree of wearRecommendations
4000–45000–10%The battery is in excellent condition. It's not the problem.
3500–400010–25%We need to optimize the software and reduce the load.
3000–350025–35%Critical wear and tear. Consider replacing the battery.
Less than 3,000More than 35%Replacement is needed. There's a risk of a sudden shutdown at 20 to 30 percent charge.

⚠️ Warning: If the design capacity is below 3,500 mAh and the phone is shut down at 15-20% charge, this is a sign of degradation of the power controller, in which case the replacement of the battery may not help: you will need a diagnosis of the motherboard.

What is a "charging cycle"?
One charging cycle is a full discharge of 100% to 0% and a reverse charge of 100%. For example, if you discharged your phone from 100% to 50% and then again to 100%, this counts as a 0.5 cycle. The average lithium-polymer battery can withstand 500-600 cycles until you lose 20% capacity.

2. Software "leaks": MIUI and background processes

MIUI (especially versions 12-14) is known for aggressive optimization, but often it works against the user.

  • πŸ€– Auto-update system applications (Mi App Store, Mi Video, Mi Browser) run in the background and download updates even when Wi-Fi is turned off (via mobile Internet).
  • πŸ“Š Xiaomi Analytics sends data about smartphone usage to the company’s servers every 15-30 minutes.
  • πŸ”” Mi Push Service push notifications. Even if you have disabled notifications in apps, the system service continues to poll servers for new messages.
  • 🌐 Background sync of Xiaomi account (contacts, notes, cloud) is enabled by default and does not have an explicit switch in the settings.

How do you fix that?

Disable Auto-Update Applications in Settings β†’ Annexes β†’ Application management β†’ Settings (βš™οΈ) β†’ Auto-update

Ban background activity for unnecessary applications in Settings β†’ Battery β†’ Applications selection

Disable statistics collection in Settings β†’ About Phone β†’ Reviews and Analytics β†’ Send usage data

Limit mobile traffic for background processes in Settings β†’ SIM-maps and mobile networks β†’ Transfer of data β†’ Background data-->

⚠️ Note: Disabling Mi Push Service may cause notifications to stop working in some system applications (e.g. Security or Themes).If push notifications are critical, limit your activity through Settings instead of completely disabling it. β†’ Annexes β†’ Application management β†’ All applications β†’ Mi Push Service β†’ Battery β†’ Limit background activity.

3. Hardware defects: what breaks in the Redmi Note 8 Pro most often

In addition to the natural wear of the battery, the Redmi Note 8 Pro has specific hardware problems that affect the discharge:

  • πŸ”Œ Faulty charging controller (often after falls or moisture) Symptoms: phone discharges even when the charger is connected, shows Charging, but the percentage does not increase.
  • 🌑️ Overheating of the Mediatek Helio processor G90T. When loading (games, video shooting), the temperature can reach 60-70Β°C, which forces the system to artificially limit performance and increase energy consumption.

How to diagnose hardware problems?

  1. Check the body temperature with the AIDA64 app (Sensors section) If the CPU temperature is above 50Β°C in idle, it's a sign of overheating.

πŸ’‘

If the phone is running 10 to 15 percent off overnight in airplane mode, the problem is the battery or the power controller, and if the discharge is running the same when it's off, the motherboard is to blame.

4. Settings that kill the battery (even if you didn't touch them)

Many features of the Redmi Note 8 Pros are enabled by default and work in the background, although the user does not need them.-5 "power thieves":

  • πŸ“‘ Constant search for Wi-Fi networks (Settings) β†’ Wi-Fi β†’ Additionally. β†’ Even if Wi-Fi is turned off, the phone scans the air every 2-3 minutes.
  • πŸ“ Highly accurate location (Settings) β†’ Location β†’ Regime. β†’ High precision. Uses GPS, GLONASS, Wi-Fi and mobile networks simultaneously.
  • 🎡 Adaptive brightness (Settings) β†’ Display. β†’ Adaptive brightness. Even at minimal brightness, the light sensor consumes ~5% charge per day.
  • πŸ”„ Autosynchronization (Settings) β†’ Accounts. β†’ Autosynchronizes data. syncs email, contacts and calendar every 15 minutes.
  • πŸ“Έ Background processing of photo (Settings) β†’ Annexes β†’ gallery β†’ Battery β†’ Background activity: After shooting, the phone takes up to 10 minutes to optimize the images.

What settings can be turned off without losing functionality?

Setting upCharge consumption (in 8 hours)Can I turn it off?
Searching for Wi-Fi in the background8–12%Yes, unless you are automatically connected to the network.
High accuracy of location15–20%Yes, if you don’t need navigation (e.g. Google Maps).
Adaptive brightness5–8%Yes, if you're comfortable with manual adjustment.
Autosynchronization of Google Account10–15%Partially. You can turn off synchronization of unnecessary data (e.g., Chrome or Drive).

πŸ’‘

Disabling High Precision Location and switching to Device Only (GPS) mode reduces charge consumption by 15-20% without significantly losing accuracy in navigation applications.

5. Trojan applications: Who steals your charge?

Some apps consume energy not only when you're using them, but also in the background. According to Battery Historian, a Google analysis tool, the top performers in the world are the most powerful.-5 "Power Thieves on Redmi Note 8 Pros come in:

  1. Facebook and Facebook Messenger are up to 25% charge per day due to constant sync and location tracking.
  2. TikTok – even in the folded state, it continues to load content in the background.
  3. Google Play Services is a system process that can consume up to 15% of its charge due to synchronization errors.
  4. Mi Fit (if a fitness bracelet is connected) – polls the sensors every 5 minutes.
  5. Uber/Yandex.Taxi tracks location even when the application is closed.

How to find and eliminate β€œgluttonous” applications?

  1. Open Settings β†’ Battery β†’ Battery Use.
  2. See the list of applications, sorted by charge consumption.
  3. Click on the application β†’ Battery Consumption Management β†’ select Limit background activity.
  4. For social networks (Facebook, Instagram), disable AutoRun in the application settings.

⚠️ Warning: If Android System or Miui Daemon is leading the consumption list (more than 30% of charging), this is a sign of a system failure.

How to completely disable background activity for the application?
1. Go to Settings β†’ Applications β†’ Application Management. 2. Select the desired application (e.g. Facebook). 3. Press Battery β†’ Battery Management. 4. Select Limit background activity and confirm. 5. Go back and press AutoRun β†’ disable the slider. After that, the application will not be able to start on its own and consume charge in the background.

6. Battery Life Extension Methods: What Really Works

If you’re not ready to change your battery or reset your phone to factory settings, here are 5 proven ways to extend your battery life by 30-50%:

  • πŸ”„ Calibrate the battery. Every 2-3 months, fully discharge the phone before turning off, then charge to 100% without interruption.
  • ⚑ Use of the original charger. Non-original RAM (especially with output) >18W) can cause overheating and accelerated wear of the battery.
  • πŸŒ™ Turning on the dark topic. AMOLED-Screens (and Redmi Note 8 Pro is equipped with screens) IPS, But still the win is there) dark theme reduces the charge consumption by 5-10%.
  • πŸ“΅ On the plane at night, if you don't need calls, turn off the network, saving up to 20 percent of your charge in 8 hours.
  • πŸ”§ Vibration shutdown: Vibromotor uses as much energy as screen at average brightness.

Alternative firmware is also worth looking at, such as LineageOS or Pixel Experience, which lacks Xiaomi’s β€œextra” services and can extend up to 20 to 30 percent of the time, but custom firmware installation requires unlocking the bootloader and may be unwarranted.

πŸ’‘

The most effective way to extend battery life is to keep the charge level in the range of 20-80%, according to a study by Battery University, this increases the number of charging cycles by 300-40%.

7.When it's time to change the battery: signs and cost

If all software methods have been tried, and the phone still runs out in 3-4 hours, it's time to think about replacing the battery.

  • πŸ”‹ The phone shuts down at 20-30% charge.
  • ⚑ Charging is jerking or interrupted.
  • 🌑️ The battery swelled (seen by the raised screen or the warping of the body).
  • ⏱️ Standby time reduced to 6-8 hours.

The cost of replacing the battery in the Redmi Note 8 Pro (2026):

Type of serviceCost (β‚½)GuaranteePros/minuses
Official Xiaomi Service Center2500–35006–12 monthsβœ… Original battery❌ Long wait (1–2 weeks)
Unofficial service (with guarantee)1800–25003–6 monthsβœ… Quickly (1–2 days)❌ Risk of a non-original battery
Self-sustaining replacement1000-1500 (battery cost)No.βœ… Cheapest of all.❌ Risk of damage to plumes or boards

⚠️ Note: When replacing a battery in an unofficial service, require a battery certificate indicating capacity. Counterfeit products often have a real capacity of 3000-3500 mAh instead of the declared 4500 mAh.

FAQ: Frequent questions about the Redmi Note 8 Pro

Can I use a power bank to charge if the original RAM is broken?
Yes, but choose a power bank with 5V/2A or 9V/2A (Quick Charge 3.0) Avoid cheap models without a voltage controller - they can damage the battery. Optimal options are Xiaomi Mi Power Bank 3 or Baseus 20000mAh.
Is it true that charging at night ruins the battery?
Partially. Modern smartphones automatically turn off charging after reaching 100%, but if the phone stays connected to the network, it periodically recharges to 100% when the charge drops to 98-99%, which creates microcycles that eventually reduce capacity. Better charge the phone to 80-90% and turn it off.
Why does the phone run out faster in the cold?
Lithium polymer batteries lose up to 30-50% of their capacity at temperatures below 0Β°C. At -10Β°C, the phone can shut down at 30-40% charge and then turn on again when it returns to heat. This is normal behavior, but frequent temperature changes accelerate the degradation of the battery.
How to check if the original battery is installed in the phone?
1. Enter the code ##4636## β†’ select Battery Information. 2. See Health parameter. If the value of good is the battery is normal. If unknown or dead is a fake or badly worn battery. 3. Also note the battery label: the original has a hologram with the Xiaomi logo and serial number.
Should 5G be turned off to save power?
Redmi Note 8 Pro does not support 5G (maximum β€” 4G LTE), So this advice doesn't apply to it. But disabling VoLTE. LTE) It can save 3-5% of your charge if you have a weak network signal. β†’ SIM-maps and mobile networks β†’ [Yours. SIM] β†’ Use VoLTE and disable the option.