Why Xiaomi Redmi 9A is not charging: full diagnostics and repairs

Xiaomi Redmi 9A is one of the most popular budget smartphones, but even it is not immune to charging problems. You plug your phone into the socket and the indicator does not burn, the battery percentage does not increase, or the device does not respond to the cable at all? There are more than a dozen reasons, from trivial contamination of the connector to serious hardware breakdowns. In this article, we will analyze all possible scenarios why the Redmi 9A does not charge, and give step-by-step instructions for fixing each malfunction.

It's important to understand that if the phone is dead and it doesn't show signs of life, the algorithm will be different from when it's charging, but very slowly. We'll look at both cases, and we'll also look at software failures that can block the charging process separately. For convenience, there is a link at the end of the article. FAQ-block with answers to frequent questions.

1. Checking of charger and cable

Start with the simplest: 90% of charging problems are due to a faulty cable, adapter or power source.The Redmi 9A supports charging up to 10W (5V/2A), but even the original power supply can fail over time.

How to check:

• 🔌 Connect another cable and adapter. Use knowingly working accessories from another device (preferably from Xiaomi too). If charging started, the problem is with the old RAM.
• 🔍 Check the cable for damage, bending, bare wires or melted areas at the base of the plug are clear signs of malfunction.
• 📱 Try charging another phone, and if it's not charging, it's the cable or the adapter.

Critical: Redmi 9A is sensitive to cable quality; cheap uncertified wires can not only not charge, but also damage the smartphone's power controller. If the left-hand cable stopped charging at all, this is an excuse to contact the service.

2. Diagnostics of the USB-C connector

The Redmi 9A USB Type-C connector is one of the most vulnerable places, and dust, moisture, mechanical damage, or even normal wear and tear can lead to poor contact.

1. Visual inspection. Light the jack inside, and if you see any contamination, oxidation, or bent contacts, you need to clean.
2. Backlash check. Carefully sway the cable in the connector. If the charge appears, then disappears - the contacts are loose.
3. Test with another device. Connect the Redmi 9A to your computer. If the PC doesn't recognize the phone, the problem is the connector or the plume.

Use a wooden toothpick (not metal!) and alcohol to clean, don't blow into the connector, it only drives the dust deeper, and if the contacts are oxidized (green coating), they can be cleaned with a cleansing gently.

Battery problems: wear and bloating

The average battery life of the Redmi 9A is 2-3 years (or ~500 charge cycles), after which the capacity drops, and the power controller can block charging due to unstable voltage.

• 🔋 The phone is charged only when it is off.
• 📉 The percentage of the battery jumps (for example, from 30% immediately to 1%).
• 🔥 The body swelled (especially noticeable from the back cover).

How to check the wear:

1. Enter the code ##4636## → select Battery Information. Health below 80% is critical wear.
2. Use the AccuBattery app (available on Google Play) to show real capacity and discharge rate.

Attention: if the battery is swelling, you can't keep using the phone, it's dangerous! The battery can ignite. Contact the service for replacement.

4. Software failures and errors

Sometimes the Redmi 9A doesn't charge because of a firmware failure or application conflict, for example, after the MIUI update, the power controller driver may fly off.

• 🔄 Reboot your phone. Hold the power button for 10-15 seconds until the Redmi logo appears.
• 🛠️ Reset the settings. Go to Settings. → The phone. → Settings reset. Select Reset all settings (does not delete files!).
• 📲 Update. MIUI. Go to Settings. → The phone. → Update the system. If you have a new version, install it.

If the phone is zero and does not turn on:

1. Connect the original RAM and hold it for 30 to 60 minutes. Sometimes it takes time for the controller to wake up.
2. If the indicator is not on, try a forced start: press Power + Volume up for 10-20 seconds.

💡

After resetting, disable battery optimization for system applications. Go to Settings → Battery → Battery Optimize and select All Apps → Do not optimize for Settings and Google Play Services.

5. Problems with the power controller

The power controller (PMIC) is a chip on the motherboard that controls charging and power distribution. If it fails, the phone can:

• Do not charge at all (even with a serviceable battery and cable).
• Only charge from a certain zoo.
• Overheating while charging.

Causes of Controller Failure:

It is impossible to repair the controller on your own - soldering at the level of chips is required. The average cost of repair in the service is 1500-3,000 rubles (depending on the region).

💡

If the Redmi 9A is not charging and is warming up a lot, it is a sure sign of a malfunction of the power controller.

Mechanical damage and moisture

Dropped your phone? Wet? Even a minor impact or moisture can cause the plume to break or the contacts to corrosion.

• 💧 Moisture: You can see white or green spots on the board (oxidation.
• 🔨 Strike: After the fall, cracks appeared on the body, connector USB sluggish.
• ⚡ Short circuit: The phone warms, discharges quickly or turns off when connected to the RAM.

What to do:

1. If your phone is wet, don't turn it on or charge it! Take it to the ultrasound cleaning service.
2. If you've had a hit, check the integrity of the power plume (connects the USB connector to the board) and 30 percent of the time, you just need to reconnect it.

⚠️ Warning: If after a fall the phone starts to reboot or turn off when charging, this is a sign of damage to the board.

7. Alternative charging methods

If standard charging doesn’t work, try alternative methods:

• 🔌 Wireless charging.Redmi. 9A It does not support Qi out of the box, but you can use an adapter with USB-C on the Qi receiver (stands) ~500 rubles).
• 💻 Charge from the computer. Connect the phone to the computer. USB-If you're charging, the problem is the power supply.
• 🔋 External battery (powerbank) Sometimes the phone only charges from the power bank due to unstable voltage in the socket.

If neither method works, there are two options:

1. Take the phone to the service for the diagnosis of the fee.
2. Buy a new battery and replace it yourself (if you are confident in your abilities).

💡

For emergency charging Redmi 9A you can use the charger from Redmi Note 8/9 – they have similar characteristics (5V/2A) and are compatible.

FAQ: Frequent questions about the Redmi 9A charging