Wireless charging on Xiaomi smartphones is a convenient feature that eliminates the need to plug in the cable every time. But what if the device suddenly stopped charging wirelessly? The problem can be in trivial details (the wrong position of the phone at the station) and serious malfunctions (a damaged coil or a firmware failure). In this article, we will analyze all the possible reasons why Xiaomi does not charge through wireless charging, and give step-by-step instructions for their elimination, from simple checks to complex technical manipulations.
We will pay special attention to Xiaomi models 13/14 Pro, Mi 11 Ultra, Redmi K50/K60 And other flagships with support for Qi-standard, as they often face similar problems. MIUI, And if you fall or get moisture, you'll find a solution here, and for those of you who don't want to read the whole article, we've prepared a solution. FAQ-Quick answers to the most frequent questions.
Before you carry your phone to the service center, go through our checklist. 80% of the time, the problem is solved by yourself in 5-10 minutes!
Verification of basic charging conditions
Start with the obvious: users often miss the basics that make Xiaomi not charging wirelessly.
- 🔌 Connect the charging station to the grid. Make sure the power adapter is plugged in and the indicator at the station is on (if you have one). Try another connector or network filter -- maybe the problem is the outlet.
- 📱 Right position of the phone. Most stations have tags or magnets to center on, and if the smartphone is crooked, the charging may be interrupted. Try to move it slightly in different directions.
- 🔋 Charging adapter: Wireless stations require a sufficiently powerful power supply (usually) 10W If you use a weak adapter from a lamp or other device, charging may not start.
- 🛡️ Cover or sticker: Thick covers (especially with metal inserts) or magnetic stickers can block the signal. Take off the case and try again.
If you don't start charging after this manipulation, move on to the next section, and if you do, remember, 90 percent of wireless charging failures are due to faulty connections or mechanical obstacles.
⚠️ Some Xiaomi models (such as the Mi 10 Ultra) support charging up to power. 50W, But only with branded stations, and using cheap analogues can lead to overheating or failure of charging.
Diagnostics of the charging station
If the basic checks didn't work, the problem could be in the wireless station itself.
- Check on another phone. Connect another Qi-enabled smartphone to the station (like an iPhone or Samsung). If it's charging, your Xiaomi is a problem. If it's not, the station is faulty.
- Look at the contacts. There may be contamination or oxidation on the back of the station.
- Try another cable/adapter. Sometimes it's not the transmission module itself that's to blame, but the power supply. Use the original adapter from Xiaomi at 18W or higher.
If the station does not work with any phones, it will have to be replaced. Note the models with support for Qi 1.3 (for example, Xiaomi Wireless Charging Stand 2) – they are compatible with the latest flagships of the brand and provide stable charging.
Check the station on another phone
Wash your contacts with alcohol
Use the original power adapter
Try another socket or extension-->
| Symptoms. | Probable cause | Decision |
|---|---|---|
| Station is offline. | Faulty adapter or cable | Replace the power supply with the original |
| The indicator flashes, but charging is not going | Poor contact or contamination of the coil | Clean the station and move the phone. |
| Charging is coming in jerks. | Capacity incompatibility | Use the station with 10W+ support |
| The station is warming and shutting down. | Overload or short circuit | Turn off and let cool, check the cable |
3. Smartphone problems: hardware malfunctions
If the station is working, but Xiaomi still doesn’t charge wirelessly, the problem may lie in the phone itself.
- 🔄 The intake coil is damaged, it's under the back cover, and it can break down after a fall or a hit, and it's not responding to any station, but the wired charging is working.
- 💧 Even if the smartphone is not sinking, condensation or high humidity can cause contact corrosion. Check the moisture indicator (usually under the tray for the scaling of the scaling table). SIM-map).
- 🔥 If the phone is too hot (like after games), the system can block wireless charging for safety.
- 🔋 Battery wear. Older batteries (80% health or lower) may not be good at wireless charging. Check battery status in Settings → Battery → Status.
Critical information: on Xiaomi 12T Pro and Redmi K50 Gaming models, the receiver coil is integrated into the midframe module. Replacing it requires a complete disassembly of the phone and costs 30-50% of the price of the device. If your smartphone is warranty, do not disassemble it yourself!
⚠️ Attention! If the phone falls into water or has been subjected to a strong vibration (for example, in a car without a mount), do not try to charge it wirelessly. This can cause a short circuit.
How to check the coil without disassembly?
4. Software failures and MIUI settings
Sometimes wireless charging fails because of firmware errors or incorrect settings.
- Reboot your phone. It's corny, but it often helps. Press the power button and select Reboot.
- Reset the charging settings. Go to Settings → Battery → Charging settings and turn off/on the option Wireless Charging.
- Update MIUI. Go to Settings → About Phone → System Update. Sometimes bugs are fixed in newer versions of firmware.
- Reset all settings (without data loss). Go to Settings → System → Reset → Reset all settings. This will return charging parameters to factory.
If the problem occurred after the MIUI update, try to roll back to the previous version via Fastboot. instructions for this are available on the 4PDA or XDA Developers forums. Remember: rollbacks can lead to data loss, so do a backup!
💡
If wireless charging is working in jerks after the MIUI update, try turning off Adaptive Charging in the battery settings. It sometimes conflicts with the Qi protocol.
5. Conflicts with accessories and third-party devices
Wireless charging can be blocked due to interaction with other gadgets.
- 🧲 Magnetic holders or cases: Strong magnets (e.g. in car mounts) can interfere with the coil.
- 📶 NFC-If you put your phone on a station next to a card or a key fob, you might have a frequency conflict. NFC-farther.
- 🔊 Speakers or speakers: Powerful speaker systems (especially those with unshielded coils) can cause interference. Try charging your phone elsewhere.
- 🔌 If there's a second wireless charging phone nearby, the stations can interfere. Spread them 30 miles away.+ centimeter.
On the Xiaomi Mix 4 and 13 Ultra models, there is a Reverse Wireless Charging feature (for charging other devices). If activated, it can interfere with normal charging. Turn it off in Settings → Battery → Reverse Charging.
6. When to contact the service center
If you’ve tried all the ways, but Xiaomi still doesn’t charge wirelessly, it’s probably a hardware problem.
- 🔧 The phone doesn’t charge at any station, but wired charging works.
- 🔥 The station or phone gets very warm when trying to charge (the risk of short circuit).
- ⚡ Charging is only at a certain angle - this is a sign of a damaged coil.
- 💥 Phone turns off when connected to station – a problem with the power controller is possible.
The cost of repair depends on the model:
- Xiaomi 11T/12T: reel — 3 000–5 000 ₽.
- Redmi K40/K50: midframe replacement — 5 000–8 000 ₽.
- Xiaomi 13/14 Pro: diagnostics + repair — 7 000–12 000 ₽ (due to the complexity of disassembly).
If the phone is warranty, don't disassemble it yourself! Contact the official Xiaomi service center. mi.com/ru/service.
💡
Before visiting the service, back up your data via Mi Cloud or Xiaomi PC Suite. When replacing the coil or motherboard, the data may be lost.