How to properly charge the machine to remove Xiaomi coils: step-by-step instructions and tips

Xiaomi’s reel removal machine has been a lifeline for those who want to keep their clothes in perfect condition without the hassle of it. However, like any battery device, it requires proper handling — especially when it comes to charging. Failure to follow simple rules can lead to rapid battery wear, shorten battery life, or even break the device.

In this article, we will analyze all the nuances of charging a Xiaomi coil removal machine: from choosing a charger to interpreting indicators and solving typical problems. You will learn how long it takes to fully charge, whether the device can be used while connecting to the network, and how to extend the battery life. D500 and D600, Which are the most popular among users.

If you have just purchased a machine or encountered difficulties in charging – this guide will help to avoid errors and make the most of the device.

What Xiaomi Removal Machines Need Charging?

Not all Xiaomi coil removal machines are battery-powered, such as budget models that can run on a network adapter or batteries, but most modern devices like:

• 🔋 Xiaomi Deerclean D500 — compact machine with a lithium-ion battery with a capacity of 1200 mAh;
• 🔋 Xiaomi Deerclean D600 — Improved version with 1500 mAh battery and more powerful engine;
• 🔋 Xiaomi Mijia Fabric Shaver 2 – model with fast charging and increased work life;
• ⚡ Xiaomi Soocare X300 — hybrid model that supports network and battery.

All of the devices listed, except Soocare X300 (They need to recharge periodically, and the charging process is almost identical to that of the two, but it can vary in time and type of connector.

To find out which battery is installed in your model, pay attention to the markings on the case or in the instructions, D500 plug USB Type-C, and D600 — Proprietary connector: This is important to consider when choosing a charger.

What Charger Should I Use for a Xiaomi Machine?

The choice of charger is not only the charge rate, but also the safety of the battery. The manufacturer recommends the use of the original adapter, which comes with the machine. However, if it is lost or malfunctioning, you can find a similar one - but with the key parameters:

• 🔌 Type of connector: for D500 — USB-C, for D600 — Branded connector (not compatible with Micro-USB!);
• ⚡ Power: optimal 5V/1A (for D500) or 5V/2A (for D600);
• 🛡️ Certification: Adapter must support standards CE ROHS;
• 🔋 Cable: it is better to use the original or high-quality analogue with copper veins.

Use of chargers with higher power 5V/2A It can overheat the battery and reduce its lifespan, for example, if you connect the machine to the adapter from the smartphone. 9V/2A, The charging controller may not be able to handle the load.

Cheap no-name adapters are also avoided, as they often lack protection against power surges, which can lead to battery failure. If the original charger is lost, it is better to purchase a certified replacement from proven brands such as Anker or Baseus.

Step-by-step instructions: how to charge a machine to remove the coils

The process of charging a Xiaomi machine is simple, but has several nuances that will help to avoid errors.

1. Prepare the device: Make sure the machine is off before charging. Press and hold the power button for 3 seconds.
2. Cable connection: insert the plug into the connector on the body of the machine. D500 The sleeve is located on the end, for D600 — bottom panel.
3. Network connection: Connect the other end of the cable to the charger and then insert the plug into the socket.
4. Indication control: a red indicator will light up on the body of the machine - this means that charging has begun.

While charging, the device may get a little warmer – this is normal. however, if the case gets hot (over 40).°C), immediately disconnect it from the network and let it cool down.

Make sure the machine is off.

Use an original or certified cable

Check the integrity of the connector on the device

Do not cover the machine during charging

-->

Average full charge time:

Note that if the machine has not been used for a long time (more than 3 months), the first cycle of charging can take up to 4-5 hours, this is due to the peculiarities of lithium-ion batteries, which discharge even when turned off.

Charging indicators: what do colors and flashes mean

Xiaomi cars are equipped with light indicators that signal the status of charging.

• 🔴 Red constant light – charging, battery level less than 80%;
• 🟡 Orange constant light – charge level 80-99%;
• 🟢 Green permanent light - charging completed (100%);
• 🔴 Red flashing light – charging error (failed cable, adapter or battery);
• 🟢 Green flashing light – the device is discharged to a critical level (urgent charging is required).

If the indicator does not light up at all, check:

1. Integrity of cable and connector;
2. The capacity of the socket;
3. Cleanliness of contacts on the typewriter (if necessary, wipe them with an alcohol napkin).

⚠️ Warning: If the indicator flashes red after connecting to the network and the machine does not charge, do not try to "reboot" it with multiple presses of the power button. This may indicate a malfunction of the charging controller - in this case, contact the service center.

On some models (e.g. Mijia Fabric Shaver 2), the indicator can display the charge level as a percentage with a brief press on the power button, which is convenient for monitoring the remaining running time.

Typical charging errors and how to avoid them

Many users have problems charging a reel machine because of common mistakes, and here are the most common ones and how to solve them:

• 🔌 Using a non-original cable - can lead to slow charging or overheating. Solution: use a kit cable or a certified analogue.
• 🔋 High or low temperature charging – optimal range: 10–35°C. Solution: Do not charge the device in the cold or in direct sunlight.
• ⏳ Charging interruption: If you turn off the machine from the mains to full charge, the battery loses capacity faster. Solution: wait for the green indicator.
• 🚫 Storage in a discharged state - if you leave the machine dead for a long time, the battery can fail. Solution: before storing, charge to 40-60%.

Another common problem is that the machine doesn't turn on after charging, and the reasons may be:

• The battery is completely discharged (it takes 10-15 minutes to charge before turning on);
• The power button has jammed (try to move it carefully);
• Failure of firmware (in this case, resetting will help - hold the power button for 10 seconds).

⚠️ Note: if the Xiaomi Deerclean machine D600 After charging, it lasts less than 10 minutes, this may indicate battery wear. In this case, you need to change the battery - contact an authorized service center.

To extend the battery life, avoid deep discharge (below 10%) and recharge (keep charging for no more than 1-2 hours after reaching 100%).

💡

If the machine has not been used for a long time, charge it for 4-5 hours before the first turn on, even if the indicator shows 100%, which will help to "wake up" the battery and restore its capacity.

How to extend the battery life of Xiaomi machine

Lithium-ion batteries used in reel machines have a limited lifespan, typically 300 to 500 charge cycles, but if used properly, this lifespan can be extended significantly.

• 🔄 Avoid full discharge – charge the device at 20-30%;
• ☀️ Store in a cool place – ideal temperature: 15-25°C;
• ⚡ Use a “native” charger – this minimizes the risk of overheating;
• 🔌 Disconnect from the network after full charging – do not leave on charging overnight;
• 🔋 Calibrate once every 3 months – completely discharge and charge the machine.

Also avoid mechanical damage, such as bumps or falls that could damage the battery. If the machine falls from a height, check its performance before charging: there may have been a shift in the internal components.

For models with removable battery (for example, Soocare) X300) You can buy a spare battery and alternate between them, so you can reduce the load on the main battery and prolong its life.

The average battery life, when properly operated, is 2-3 years, and if the machine starts to run out in 10-15 minutes, it will probably require a battery replacement.

Can I use the machine during charging?

This question is of concern to many users, especially if the device is depleted at the most inopportune time.

• ✅ Xiaomi Deerclean D500/D600 — You can, but you don't recommend it. When you're under load, the battery heats up more, which reduces the battery life.
• ❌ Xiaomi Mijia Fabric Shaver 2 – not possible, as it can cause a failure of the charging controller.
• ⚠️ Soocare X300 — It is possible, but only in network mode (if supported).

If you need to remove the coils immediately and the machine is discharged, you better wait 10-15 minutes for it to charge a little, and then use it offline.

Also note that when used during charging:

• The full charge time will increase;
• The machine may overheat.
• There is a risk of cable damage due to tension.

⚠️ Warning: If the machine starts vibrating strongly or making unusual sounds while running off the mains, turn it off immediately.

What to do if the Xiaomi machine is not charging?

If the indicator does not respond to the connection to the network, and the machine does not charge, follow the following diagnostic steps:

1. Check the cable and adapter – try charging another device (like a smartphone).
2. Examine the connector on the typewriter - if necessary, clean it from dust or dirt with a toothpick.
3. Restart the device – hold the power button for 10 seconds.
4. Try another charger - maybe the problem is the adapter.
5. Check the voltage in the socket – connect another appliance to make sure the socket is working.

If none of these methods worked, the reason could be:

• 🔋 Battery Failure (Replacement Required);
• 🔌 Charging controller failure (requires repair);
• 💻 Firmware failure (try resetting settings).

For Deerclean models D500/D600 You can try "forced" charging:

1. Connect the machine to the charger;
2. Hold the power button for 15 seconds.
3. Release the button and wait 5 minutes – sometimes it helps to wake the controller.

If the machine is still not charging, contact the service center Xiaomi. in most cases, the problem is solved by replacing the battery or charge control board. the cost of repairs usually does not exceed 1000-1500 rubles (2026).

💡

If the machine is not charging, check the cable, adapter and connector first, and 80 percent of the time, it's the cable, not the device itself, that's the problem.

FAQ: Frequent questions about charging Xiaomi’s reel removal machine