Which battery to choose for Xiaomi phone: original or analogue?

The battery is the heart of your Xiaomi smartphone, which not only affects battery life, but also the overall stability of the device. Over time, even the best batteries lose capacity: the phone starts to run out in a few hours, turns off at 20-30% charge or overheats during charging. If you encounter these problems, it’s time to think about replacing the battery.

But how do you choose the right battery among dozens of options? Xiaomi's original batteries are expensive, and the market is full of cheap fakes that can ruin your phone or even cause a fire.

  • πŸ”‹ How to determine if the battery is time to change (symptoms of wear and diagnosis).
  • πŸ“± Which Xiaomi models require a special approach (for example, Redmi Note 10 Pro or Xiaomi models) POCO F3 battery-free).
  • πŸ” Previous articleThe original vs analogues: what are you risking, choosing a non-original battery, and what brands can be trusted.
  • πŸ’° Where to buy, so as not to run into a fake (official stores, verified sellers, marketplaces).
  • βš™οΈ How to replace your battery yourself (if you have experience) or where to find a good wizard.

We will also rank the best batteries for Xiaomi’s popular models (2020-2026) and answer frequent questions: can you use a larger battery, how to check the originality and what to do if the phone does not turn on after replacing.

πŸ“Š What kind of Xiaomi smartphone do you have?
Redmi Note 10/11/12
POCO F3/F4/F5
Mi 11/12/13
Another Xiaomi
Not Xiaomi.

1. Signs of battery wear: when is it time to change?

The average life of a lithium-ion battery is 2-3 years (or 500-800 full charge cycles), and then the capacity drops by 20 to 30 percent, and the phone starts to behave unpredictably. Here are the key symptoms that the battery should be replaced:

  • πŸ”‹ Fast discharge: the phone sits down in 3-4 hours with moderate use (previously kept the day on).
  • πŸ“‰ Charge jumps: for example, from 40% immediately drops to 15%, or the phone turns off at 20-30%.
  • πŸ”₯ Overheating during charging or playing (the battery gets hot, the body heats up).
  • ⚑ Slow charging: even with the original RAM, the phone charges 3-4 hours instead of 1-1.5.
  • πŸ’₯ Battery bloating (seen from the raised screen or warping of the back cover).

If you notice at least 2-3 signs from the list, the diagnosis will confirm wear.

  • πŸ“± Through the phone menu: Settings β†’ Battery β†’ The state of the battery (on some models shows the percentage of wear).
  • πŸ”§ With applications like AccuBattery (Android) or AIDA64.
  • πŸ”Œ Connect your phone to your PC and use the Mi Flash Tool (for advanced users).

⚠️ Warning: If the battery is swollen, immediately disconnect the phone from charging and do not use it until replaced! lithium-ion batteries can ignite if damaged.

πŸ’‘

Before buying a new battery, reset the battery statistics in the settings (Settings) β†’ Battery β†’ Three points. β†’ This will help to better assess the capacity after replacement.

2. Original Xiaomi batteries: pros, cons and where to buy

Xiaomi's official batteries are the most reliable option, but they cost more than their counterparts and are not always available.

PlusesCons
βœ… 100% compatible with the phone (no problems with charging, display charge, overheating).❌ The price is 2-3 times higher than that of analogues (from 1500 to 4000 rubles).
βœ… Warranty from the manufacturer (usually 6-12 months).❌ It is hard to find for older models (e.g. Redmi). 4X or Mi A1).
βœ… Conformity of the declared capacity (no deception with mAh).❌ Frequently faked (up to 40% of the β€œoriginal” on marketplaces – fake).

Where to buy the original batteries:

  • 🏬 Official Xiaomi store (mi.com or brand stores in Russia).
  • πŸ›’ Authorized service centers (list on Xiaomi website).
  • 🌍 Checked overseas stores: AliExpress (only official sellers with a rating of 98%+), Banggood, Gearbest.

How to distinguish the original from the fake:

  1. Check the hologram and serial number on the package (should match the number on the battery).
  2. The original battery is black or dark gray, smooth contacts and the labeling Made in China (not Made in Korea or other countries).
  3. It should be on the box. QR-code that leads to the official website of Xiaomi.

⚠️ Warning: AliExpress often sells "original" batteries labeled "For Xiaomi" - these are fakes! the real original will be labeled "Xiaomi Original" and the serial number.

Previous articleBattery Analogs for Xiaomi: Which Brands Can Be Trusted?

If the original battery is too expensive or not available, you can consider quality analogues, the main thing is to choose a proven manufacturer, so as not to run into a low-quality battery that will last a couple of months.

The best brands for Xiaomi:

  • πŸ”‹ ZMI (Xiaomi subsidiary – almost original quality, often using the same components.
  • πŸ”‹ Baseus – reliable batteries with good capacity, often come with replacement tools.
  • πŸ”‹ Remax – budget option, but time-tested (suitable for older models).
  • πŸ”‹ Patona is a German brand specializing in smartphone batteries.

What to check when buying an analogue:

  • πŸ“ Capacity: Must match the original (for example, for Redmi Note 10 Pro – 5020 mAh).
  • πŸ”Œ Voltage: usually 3.85V or 4.4V (refine for your model).
  • πŸ”§ Connector and shape: Some analogues may not fit in size or contacts.
  • πŸ“„ Guarantee: Self-respecting sellers give at least 6 months.

Never take batteries without a label or labeled β€œUniversal” – they will not only fail quickly, but can also damage the phone’s power controller.

β˜‘οΈ Checking the battery before buying

Done: 0 / 4

We have collected the best options for the most common Xiaomi smartphones, and the table shows original and proven analogues with links to the purchase (currently for 2026).

Model phoneOriginal batteryBest analogueCapacityApproximate price
Redmi Note 10 Pro / Pro MaxXiaomi MBJ4064 (5020 mAh)ZMI ZMXB01 (5,000 mAh)5000–5020 mAh2500–3500 β‚½
POCO F3 / Xiaomi Mi 11XXiaomi MBJ4057 (4520 mAh)Baseus BCC-QC06 (4500 mAh)4500-4,520 mAh1800–2800 β‚½
Xiaomi 12 / 12 ProXiaomi MBJ4100 (4500 mAh)Patona P-X12 (4400 mAh)4400-4500 mAh3000–4500 β‚½
Redmi 9 / 9A / 9CXiaomi MBJ4035 (5,000 mAh)Remax RBA-5000 (5,000 mAh)5,000 mAh1200–2000 β‚½

For other models (Redmi Note 11, POCO X3, Mi 10T Look for batteries by the battery model code (written on the original battery, for example, MBJ4064). He can be found:

  • On an old battery (if the phone is already disassembled).
  • In the documentation on the phone or on the GSMArena website.
  • Through the app AIDA64 (battery).
How to find the battery code without disassembling the phone
Open the app. AIDA64 β†’ Go to the Battery section β†’ Find the Battery line ID Or a Model. It'll have a code of the species. MBJXXXX or DM-BHXX.

5. Can I put a larger battery?

Many users want to increase the battery life of their phone by installing a battery with a larger capacity, like 5,000 or 6,000 mAh instead of the standard 4,000 mAh.

  • ⚠️ Power controller overload: the smartphone is designed for a certain charge/discharge current. A larger battery can produce too high current, which will overheat or fail the motherboard.
  • ⚠️ Size incompatibility: Larger batteries are often thicker and cannot be installed without body modifications.
  • ⚠️ Incorrect charge display: the phone will show 100%, although in fact the battery is charged only 80%.

Exception: Modified batteries from proven brands (e.g, ZMI Or Baseus, which are specifically adapted for specific models:

  • Make sure the manufacturer is compatible with your model.
  • Make sure that the capacity does not exceed the original by more than 10-15%.
  • Use only the original charger.

⚠️ Warning: If you do decide to experiment, be prepared for the phone to stop turning on or to start turning off arbitrarily.

6. Self-replacement of the battery: step-by-step instructions

If you have experience disassembling the equipment, you can replace the battery yourself.

  • πŸ”§ Set of screwdrivers (cross, flat, torks) T3–T5).
  • πŸ”¨ Plastic mediator or shoulder blade to disconnect the battery.
  • πŸ”₯ Hair dryer or thermo-air station (for softening glue).
  • 🧴 Isopropyl alcohol (for cleaning contacts).
  • πŸ”‹ New battery and double-sided tape (if the old glue has lost its properties).

Step-by-step process:

  1. Turn off the phone and remove it. SIM-map.
  2. Heat the back cover with a hair dryer (especially at the edges) and gently tuck it with a mediator.
  3. Unscrew the screws holding the battery's metal plate.
  4. Carefully disconnect the battery plume from the motherboard (use a plastic spatula!).
  5. Warm the battery with a hairdryer (not higher than 60)Β°C) and carefully separate it from the body.
  6. Install a new battery, plug in the plume and assemble the phone in reverse order.

What can't be done:

  • πŸ”₯ Use metal tools to disconnect the battery (risk of short circuit).
  • πŸ’₯ Puncture or bend the battery (may swell or ignite).
  • πŸ”Œ Connect the battery plume with the phone on.

πŸ’‘

If you are not sure about your skills, it is better to contact the service center. The cost of replacing the battery in the official Xiaomi service is from 1500 to 3000 rubles (excluding the price of the battery).

7. Where to replace the battery, if you do not want to do it yourself?

If you are not willing to take the risk of disassembling your phone yourself, contact a trusted service.

  • 🏒 Official service centers Xiaomi: Pros: warranty for work, original parts. Cons: high price (from 3000 rubles with work), long wait (sometimes 1-2 weeks).
  • πŸ”§ Independent service centers: Pros: cheaper (from 1000 rubles), faster (1-2 days). Cons: the risk of running into unqualified masters or fake batteries.
  • πŸ›’ Electronics stores with replacement service (for example, Svyaznoy, M. Video): Pros: you can buy a battery and install it right away. Cons: there are not always original spare parts.

How to choose a good service:

  • πŸ“„ Check reviews on Yandex.Maps or Google.
  • πŸ” Check whether you have a job guarantee (at least 3 months).
  • πŸ’¬ Ask what batteries are used (original or analogue).
  • πŸ’° Compare prices: if the cost of replacement is too low (for example, 500 rubles), this is a reason to be wary.

⚠️ Attention: After the battery is replaced, the phone may show an incorrect percentage of charge in the first 2-3 charging cycles. This is normal - the battery needs to "swing." If the problem does not disappear, it may be that the master has improperly connected the plume.

FAQ: Frequent questions about battery replacement in Xiaomi

❓ Can I use a battery from another Xiaomi model?
No, even if the capacity and voltage are the same, the batteries are different in size, the location of the contacts and the power controller, and if you install the wrong battery, you can short-circuit or damage the motherboard.
❓ How long will the new battery last?
The battery life depends on battery quality and operating conditions: Original battery: 2-3 years (500-800 cycles); Quality analogue: 1.5-2 years (400-600 cycles); Cheap fake: 3-6 months (100-200 cycles); To extend the life of the battery, avoid deep discharge (do not allow a fall below 10%) and overheating (do not charge the phone in the sun or under the blanket).
❓ The phone doesn't turn on after the battery is replaced?
Possible causes and solutions: πŸ”Œ The battery plume is not connected. β†’ Disassemble the phone and check the connection. πŸ”‹ Faulty battery β†’ Try to replace the old one (if it still works) or replace the new one. ⚑ Settings are off. β†’ Connect your phone to charge for 10-15 minutes, then try turning it on. πŸ’» Firmware came down. β†’ You may need to flash your phone over the Fastboot. If nothing works, contact the service center - the problem may be the power controller on the motherboard.
❓ How to check if the original battery is installed?
Verification methods: Look at the labeling: the original has a serial number, hologram and the words Xiaomi Original. AIDA64: The Battery section should specify the correct model (e.g., the correct model, MBJ4064). Check the time: the original battery holds the charge longer than the analog.
❓ Should the battery be calibrated after replacement?
Yes, calibration helps the phone correctly determine the charge level. How to do this: Charge the phone to 100% and hold on charging for another 1-2 hours. Turn off the charge and use the phone until it automatically turns off (do not turn it on until it completely sits down). Connect to charging and charge to 100% without interruptions. Repeat the cycle 2-3 times. After that, the charge percentage will be displayed more accurately.