What is the battery in the thermometer Xiaomi: selection and replacement

Owning modern Xiaomi equipment requires careful attention to power sources, especially in devices that provide health monitoring. When a symbol of a dead battery appears on the screen or the indicators become unstable, the user is faced with the question of choosing the right battery. A mistake in the type or characteristics of the battery can lead not only to the cessation of the device, but also to errors in the measurement of body temperature.

Many smart device owners mistakenly believe that all batteries are the same, but for precision electronics, voltage, capacity and chemical composition are important. The Chinese giant’s line of thermometers uses different form factors depending on the specific model and year of release. Understanding these differences will allow you to avoid buying the wrong item and prolong the life of the gadget.

In this article, we will discuss in detail what types of batteries are used in various modifications of thermometers, how to replace correctly and what nuances should be considered when choosing a brand.

Types of power in Xiaomi devices

Xiaomi and Mijia are a wide range of measuring instruments, each designed with specific power consumption and dimensions in mind. The standard for most portable medical devices is the classic CR2032 format, a lithium-manganese pill battery that provides a stable 3 volt voltage over a long period of time.

However, there are more specific models, especially in the segment of professional or non-contact infrared thermometers, which can use elements of the AAA format (in common use "finger" batteries, although technically they are pinky-finger batteries), which provide more capacity for powerful sensors and displays. It is important to distinguish these types, since they are not physically interchangeable.

For smart devices connected to a smartphone via Bluetooth, self-discharge and stress stability under load are critical. Using cheap alkaline counterparts instead of recommended lithium ones can lead to rapid charge loss and incorrect data transfer to the Mi Home app.

• 🔋 CR2032 — standard lithium battery-tablet, most common in classic and smart models.
• 🔋 AAA — Used in powerful contactless thermometers, requires three or four pieces to work.
• 🔋 LR44/AG13 — rare, but found in compact children's models of old series.

⚠️ Warning: Never attempt to install an inappropriately sized battery, even if it appears close in diameter, which may short-circuit or damage the device's contacts.

Model range and compatibility of batteries

To determine exactly what power supply your device needs, you need to know the exact model name. Xiaomi produces thermometers under different brandings, including Mijia, iHealth and Dr. Bei. Each series has its own design features that affect the type of energy used.

The most popular Mijia iHealth (often referred to as the KT02 or ZDT001) uses a single standard CR2032 battery, which is designed minimally and uses low power, while infrared contactless thermometers like the Xiaomi Mijia Infrared Thermometer require more power, so they have three AAA-type units.

For the convenience of users, we have prepared a composite table of compatibility, which will help you quickly navigate depending on the appearance of your device.

When buying new batteries, pay attention to labeling. For thermometers, it is critical to use lithium cells (denoted by the letter L at the beginning of the code, for example, CR), rather than alkaline ones, since the latter can give voltage drawdown at low temperatures.

Instructions for replacing the battery

The process of replacing the power source in Xiaomi thermometers, as a rule, does not require special tools, but requires accuracy. The design of the devices is designed with the expectation of rare maintenance, so the compartment cover can open with some effort.

To start, flip the device upside down. Depending on the model, you'll need to find a battery compartment. In CR2032 models, it's a circular compartment, often covered with a counterclockwise lid, or tampered with a thin object. In AAA battery models, the compartment is usually closed with a sliding cap with a lock.

Remove the old battery while observing polarity. Pay attention to the location of the plus (+) and minus (-). In thermometers, Xiaomi plus usually points up (to the lid), but it is better to double-check the marking inside the compartment. Insert a new battery, pressing it tightly until the click (CR2032) or until the stop (for AAA).

Once installed, close the bay and turn on the device. If the screen is full or the discharge indicator is gone, the replacement was successful. Some smart models may require re-synchronization with the application.

⚠️ Warning: Do not use metal tools (tweezers, scissors) to remove the battery if it is stuck.This can damage the internal chains. Use a wooden or plastic spatula.

How to choose a quality battery

The cell market is crowded with products of varying quality, and for medical equipment, savings can come out sideways. Cheap batteries of unknown brands often have less real capacity and can leak in a short time, damaging the contacts of the thermometer.

It is recommended to give preference to proven manufacturers such as Panasonic, Duracell, Energizer or Maxell. These companies use quality materials and provide stable voltage throughout their life. Xiaomi thermometers are ideal batteries marked "Low Self-Discharge" (low self-discharge).

💡

Buy batteries only from large chains or specialty stores, and there is a high probability in the markets of purchasing products with expired expiration date or incorrect storage conditions.

Lithium batteries have a long shelf life (up to 10 years), but it is better to choose fresh batches, the packaging should be sealed, without any trace of opening or corrosion on the cells themselves.

• 🏆 Panasonic CR2032 — Reliability standard, often used in the original configuration.
• 🏆 Duracell Ultra – provide high power, suitable for thermometers with backlight.
• 🏆 GP Lithium – Good balance of price and quality, widely available.

Avoid buying batteries as part of "gift kits" or cheap kits where quality is often sacrificed for low price.

Problems and solutions

Even after the battery is replaced, the user may encounter a number of problems: often the device does not turn on or shows an error, first of all, you need to check the correct setting of the polarity, even a minimal skew can disrupt the contact.

If the new battery is installed correctly, but the thermometer is not working, try to wipe the contacts with a cotton swab slightly soaked in alcohol, which over time can form an oxide film that prevents current from flowing, and allow the contacts to dry completely before re-installation.

In the case of smart thermometers, after replacing the battery, you may need to re-pair the Mi Home application. The device can reset the network settings when the power is completely turned off.

⚠️ Warning: If the thermometer warms up or makes extraneous sounds after replacing the battery, immediately remove the power supply.

Recycling and environmental safety

The batteries used contain chemicals that are hazardous to the environment, and lithium, manganese and alkalis should not get into ordinary household garbage, as when decomposed in a landfill they pollute the soil and groundwater.

Recycling regulations require that waste cells be taken to special reception points, which in many cities are installed in supermarkets, electronics stores or eco-stations, a simple but important step to preserve the environment.

Keep used batteries in dry containers until disposed of, and avoid contact with metal objects (keys, coins) to avoid fire or short circuit in the trash can.

💡

Properly disposing of batteries prevents heavy metals from entering soil and water, making our world a cleaner place.

Frequently Asked Questions (FAQ)