Compact TWS-Headsets from Xiaomi have become a hit due to the affordable price and decent sound, but many users are faced with the nuances of their power supply. The Airdots 2 (also known as the Redmi Airdots) doesn’t have its own port to connect the cable on the headphones themselves, which often raises questions for beginners. All the energy is stored in the case, which then transfers it to audio devices, and it is this process that requires special attention.
In this article, we will detail how to properly charge the Xiaomi Airdots 2 to avoid battery problems and extend the life of the gadget. You will learn what flashing indicators mean, how long it takes to complete a cycle and which cables are best to use. Understanding these basic principles will allow you to enjoy music longer and forget about the sudden discharge at the most inopportune moment.
The principle of operation of charging in TWS-headsets
The main feature of wireless headphones is a two-stage charging system, and first, the electric current enters the charging case through a Micro-USB connector located on the bottom of the case, and inside the case is an integrated battery that acts as a powerbank for the headphones themselves.
When you put the headphones inside the case, the power transfer process begins. It's important to understand that Redmi Airdots only charge when they're in the right pin contact inside the niche. If the contact is broken, charging won't go, even if the case itself is full of power. Contact areas on the headphones and inside the case must be clean and dry.
⚠️ Warning: Never try to charge the headphones themselves outside the case by connecting any wires to them. They do not have a connector, and such interference is guaranteed to short circuit and damage the device.
The process is indicated through LEDs on the front of the case. Red usually signals that there is an active process of energy storage, and white or no glow - about the completion of the cycle. The power management system in Xiaomi is smart enough to cut off the current when it reaches 100%, but leaving the device on charging for days is still not worth it.
Step-by-step instructions: how to put headphones on charging
To start the charging process, you will need a standard cable with a Micro-USB connector, which came with the kit, or any similar cable from a smartphone. The power unit can be almost any, but it is better to use sources with a current of 1 Ampere or 0.5 Ampere, since powerful fast Charge units can work incorrectly with a small battery capacity of the case.
Put the headphones in the appropriate niches of the case before the characteristic click of the magnet. Make sure they sit tight and do not stagger. Then connect the cable to the Micro-USB port on the end of the case, and the other end to the end of the case. USB-The computer port or the adapter in the socket, and the front panel should light up a red light.
☑️ Right sequence of actions
If the light doesn't catch fire, check the density of the headphones. Sometimes the protective film on the contacts of new devices interferes with charging - it must be removed. Also make sure that the cable is working by trying to charge it with another device or replacing the wire.
Indication and time of full charge
One of the most common questions concerns how long the Xiaomi Airdots 2 is charged. The full charge of the case itself from the network takes about 1.5-2 hours. The headphones themselves charge much faster - they take about 40-60 minutes to replenish the capacity. It is important not to confuse these processes, since the case indicator shows the status of its battery.
Color signals on the front panel inform the user about the state of the system:
- 🔴 Red is burning - there is an active charge of the case.
- ⚪ White burning – the case is fully charged.
- 🔴 Blinking – Case Charge Level Critically Low (less than 10%).
- ⚪ Blinks – there is a pairing process or headphones are in standby mode.
It's worth noting that while the case is connected to the network, the headphone indicators inside may not burn to avoid blinding the user. The charging status of the ears themselves is better checked through the smartphone screen by connecting them over Bluetooth. The Bluetooth menu displays the approximate percentage of charge of each earphone separately.
Why does the indicator go off immediately after the shutdown?
How much charge Xiaomi Airdots 2
The battery capacity in each headphone is 40 mAh, and the capacity of the case is 300 mAh. In practice, this means that one full charge of the headphones is enough for about 4 hours of continuous listening to music or conversations at average volume. The case allows you to fully charge the headphones another 3 times, which gives a total battery life of up to 12 hours.
The actual operating time may vary depending on the operating conditions:
- 🎵 Volume – at maximum volume, the battery sits down faster.
- 📶 Communication quality – poor Bluetooth signal makes the module work harder.
- 🌡️ Temperature - in severe frost or heat, the capacity of lithium batteries temporarily decreases.
To extend your work time, try not to keep your headphones out of the case for longer than you need. If you're not using them right now, you better put them in the case where they will go to sleep. Background consumption outside the case, although minimal, gradually discharges the device.
| Parameter | Meaning | Influence on the user |
|---|---|---|
| Headphone capacity | 40mAh | ~4 hours of music |
| Case capacity | 300mAh | 3 full recharging cycles |
| Case charging time | 1.5 - 2 hours | It requires planning. |
| Type of connector | Micro-USB | We need a separate cable. |
Typical Charging Problems and Their Solutions
Sometimes users are faced with a situation where one of the headphones stops charging, most often this is due to the oxidation of the contacts or the ingress of earwax on the grid and the pin connector, in which case you need to gently wipe the contacts with a dry cotton swab, perhaps slightly soaked in alcohol, but be sure to wait for the complete drying before installing in the case.
Another common problem is that the case doesn't see the earphone, even if it's inserted, which can mean that the headphone battery has gone into deep discharge, in which case leave the headphones in a closed case for charging for 30 to 60 minutes, even if the indicator does not respond immediately.
⚠️ Warning: If the headphones have been lying unused for a long time, they may not turn on immediately.Let them lie on a charge for at least an hour before trying to activate or.
If the case discharges quickly on its own, even without headphones inside, check if the pairing button is stuck. Constant pressing of the button or poor contact inside can cause current leakage. Also make sure you use quality cable, as cheap counterparts often have high resistance and do not transmit current well.
Recommendations for extending battery life
The lithium polymer batteries used in Xiaomi Airdots 2 are sensitive to extreme conditions. It is not recommended to discharge the device "to zero" regularly. Try to put the case on charge when the indicator starts flashing red, signaling a low level. Deep discharge is harmful to battery chemistry.
Avoid overheating, do not leave a case with headphones in direct sunlight, on the dashboard of the car in the summer or near heating appliances. High temperatures can irreversibly reduce battery capacity or, in rare cases, cause it to bloat. Temperature is a key factor in durability.
💡
Keep the case at room temperature, and if you don’t plan to use the headset for a long time (a month or more), charge it to about 60% and put it in a cool place.
Use original or certified charging cables. Cheap cables from markets often fall short of stated standards and can deliver unstable voltages, which negatively affects the power controller inside the case. Quality wire is inexpensive, but saves the equipment from premature death.
💡
Compliance with temperature and the use of quality cables are two main conditions for your Airdots 2 to last for years without losing capacity.