How to Charge Your iPhone with Xiaomi Redmi Power Bank: A Complete Guide to 2026

Charging an iPhone from an external battery is a seemingly simple task, but in practice users face a lot of nuances: from slow speed to no reaction to the connection. This is especially relevant for owners of Power Bank Xiaomi Redmi, which combines high capacity with an affordable price, but are not always optimally compatible with Apple’s technology. In this article, we will analyze not only basic connection steps, but also hidden settings that will speed up charging by 30-40%, as well as typical errors that reduce the life of the battery and phone, and the overbank.

It's important to understand that iPhones and Xiaomi devices use different fast charging protocols. If you just plug a cable into the connector, you'll get a minimum speed of 5W, like an old charger. To use 18W, 20W, or even 30W (depending on the model of the overbank), you'll need to pick up the cable correctly, turn on special modes on Redmi Power Bank and take into account the limitations of iOS. We tested combinations with the iPhone 15 Pro Max, iPhone 13 and iPhone SE (2022) - the results will be shown in the comparative table below.

Spoiler: Even if your Power Bank supports PD (Power Delivery), it doesn’t guarantee top speed. For example, Xiaomi Redmi Power Bank 30W only issues claimed watts when using Apple’s original USB-C to Lightning cable or certified MFi. But budget cables from the Poverbank kit often limit power to 10-12W. How to avoid this is read more.

1.What Xiaomi Redmi Power Bank models are compatible with the iPhone?

Not all Xiaomi external batteries are equally useful for iPhones, but the key is support for the USB Power Delivery (PD) protocol that is required to charge Apple devices at full speed. Here is the current list of Redmi models we recommend in 2026:

• 🔋 Xiaomi Redmi Power Bank 30W (PB3030GL) — Best price/quality balance, capacity 20,000 mAh, two ports USB-C PD and USB-A.
• 🔋 Xiaomi Redmi Power Bank 67W (PB67KGM) — top model with support for PD 3.0 and PPS, capacity of 30,000 mAh, charges the iPhone 15 to 50% in 30 minutes.
• 🔋 Xiaomi Redmi Power Bank 10000mAh (PB100LZM) is a compact variant with USB-C PD 18W, ideal for travel.
• ⚠️ Xiaomi Redmi Power Bank 2S (10000mAh, PB100L2M) — Not recommended for iPhone: no support PD, top speed 10W.

Note the label: if the body of the superbank only says Quick Charge 3.0 (without PD), then for iPhone it is suitable only for emergency charging. Also check the output power of the USB-C port - it must be at least 18W. For example, Redmi Power Bank 20000mAh (PB200LZM) USB-C port only gives 5V/3A, which is not enough for fast charging.

2.What cable is needed for maximum charging speed?

This is the most underrated factor. Even if your Power Bank supports PD 30W, the wrong cable will reduce the speed to 5W.

• 🔌 Connector type: mandatory USB-C to Lightning (for iPhone 8 and later). USB-A to Lightning cables are limited 12W.
• 🛡️ Certification: Look for the MFi (Made for iPhone) label on the package. Uncertified cables can damage the battery.
• 📏 Length and cross-section: Optimally 1 meter. cables longer than 1.5 m often have increased resistance, which reduces power.
• ⚡ Protocol support: The cable must transmit PD and PPS (for iPhone 12 and later models).

We tested 5 popular cables with iPhone 14 Pro and Redmi Power Bank 30W.

A critical mistake: using a cable from an old Android smartphone kit (such as from Samsung or Huawei) can overheat the iPhone's power controller. In 2023, Apple added protection against such cables to iOS 17 - the phone simply won't charge.

💡

Before you buy a cable, check it on the Apple MFi Program website. Enter the serial number from the package - if the cable is not certified, the system will show an error.

3. Step-by-step instructions: how to connect your iPhone to Power Bank Xiaomi Redmi

Follow this algorithm to avoid typical problems (e.g. when the phone is connected but not charging):

Activate Power Bank (click on the power button)

Use USB-C to Lightning cable with MFi

Connect the cable to the USB-C port on Power Bank

Enable PD mode (if there is a switch button)

Wait 5-10 seconds to recognize the device-->

Let's take each step in detail:

1. Turn on Power Bank. Many Xiaomi Redmi models (like the PB3030GL) have an on button. Without pressing it, the overbank won't start giving off current even if the lights are on. Some models (like the PB67KGM) have automatic on when the load is connected, but it's better to be safe.
2. Connect the cable to the USB-C port. The USB-A port on the perverbank gives a maximum of 18W, and for the iPhone it is critical to use USB-C with PD support. On Redmi Power Bank 30W, the USB-C port is indicated by the symbol of the battery with lightning.
3. Activate PD mode (if required). Some models (e.g. Xiaomi Mi Power Bank 3 Pro) have a switch button between Standard and Fast Charge modes. For iPhone, choose Fast Charge.
4. Wait for the beep. The iPhone makes a short sound when you start charging. If it's not, check the cable or port.

If you have a notification on your iPhone screen that says, "This accessory is not certified..." you are using an uncertified cable.

⚠️ Warning: Don't ignore this warning! Continued charging could damage the power controller.It's better to temporarily use the original cable or buy a certified MFi.

4.Why isn't the iPhone charging from Xiaomi's Power Bank? frequent bugs

If the charging indicator does not appear after connecting or the phone discharges further, check these points:

• 🔌 The port USB-C of the verbank is contaminated. Dust or debris can block the contacts. Clean the port with a wooden toothpick (not metal!).
• 🔋 Power Bank is under 20 percent. Some models (e.g., Redmi PB100LZM) turn off the output current at low charge. Charge the power bank from the grid.
• ⚡ Cable is damaged. Bend the cable at the connectors -- if you get an "antenna effect" (change of position improves contact), replace the cable.
• 📱 iPhone is software locked. If the phone is overheated or the battery is worn out (>85% of cycles), iOS can block charging from external sources. Check battery status in Settings → Battery → Battery status.

Special case: if the iPhone shows "Charging is not supported", but the overbank is working, try forcibly restart the phone:

1. Press and release the volume button quickly.
2. Press and release the volume button quickly.
3. Press the power button before the Apple logo appears.

If the problem persists, check the Power Bank firmware.Old models (e.g. Xiaomi Mi Power Bank 2C) require an update through the Mi Power Bank app (available for Android). iPhones cannot update the firmware of the Verbank!

5.How to speed up charging iPhone from Xiaomi Power Bank?

By default, the iPhone limits the charging current from external batteries to 5W-10W. To unlock full power, follow these steps:

• ⚡ Turn on the plane mode. This turns off the 4G/5G, Wi-Fi and Bluetooth modules, reducing the CPU load and speeding up charging by 15-20%.
• 🔌 Use the USB-C port on the poverbank. The USB-A port is physically incapable of transmitting more than 12W.
• 📴 Turn off background apps. Close all programs via App Switcher (swipe up from the bottom edge of the screen).
• 🌡️ Control the temperature. If your iPhone or your superbank is above 35 °C, iOS will automatically lower the power. Charge the devices in the shade.

For iPhone 12 and later, there's a hidden optimised charging feature that limits current to 80 percent to save battery life.

1. Go to Settings → Battery → Battery status.
2. Turn off the option "Optimized battery charging".
3. Connect the overbank again - the speed will increase by 10-15%.

Unique lifehack for Xiaomi Redmi Power Bank 67W: if you connect your iPhone to the USB-C port and Android smartphone to USB-A, the power will automatically distribute as 60% to USB-C and 40% to USB-A. Thus, the iPhone will receive up to 25W instead of the standard 18W.

💡

Maximum charging speed of iPhone from Power Bank Xiaomi is achieved under 3 conditions: certified cable MFi + USB-C port on the perverbank + aircraft mode on the phone.

6.How to extend the battery life of iPhone and Power Bank?

Incorrect charging from an external battery can reduce the battery life of the iPhone by 20-30%.

• 🔄 Avoid total discharge. Connect your iPhone to the superbank when the charge has dropped to 20 to 30 percent. A full discharge of up to 0 percent damages the lithium-ion cells.
• 🔋 Don't keep Power Bank empty. If you haven't used the powerbank for more than a month, charge it to 50% and store it in a cool place (10-20°C).
• ☀️ Don't charge in the sun. Overheating above 40°C accelerates battery degradation. Use a cooled case in the heat.
• 📵 Turn off the verbank after charging. If you leave your iPhone connected to a discharged verbank, both devices can slowly lose charge due to parasitic currents.

To check the wear of the iPhone battery, use the hidden menu:

1. Open the Phone app and dial *#5005*7672#.
2. Click Call – the service menu will open (works on iOS 15 and below).
3. Check the BatteryHealth parameter. A value below 80% means critical wear.

For Power Bank Xiaomi, the lifespan depends on the number of charging cycles. For example, the Redmi PB3030GL is designed for 500 full cycles.

⚠️ Warning: If the poverbank lights flash red when you plug in your iPhone, it means that the poverbank battery has degraded by more than 60 percent, and it's dangerous to use such a device, because it can suddenly shut down or overheat.

7. Power Bank Xiaomi Redmi comparison with iPhone counterparts

If you haven’t bought an external battery, compare Xiaomi models to Apple-optimized alternatives:

As you can see from the table, Xiaomi Redmi Power Bank 30W offers the best price-to-speed ratio. However, if you want maximum compatibility with the iPhone, consider Anker PowerCore - it supports PD 3.0 and has built-in overheating protection for Apple devices.

Another caveat: Apple’s MagSafe Battery Pack is convenient for wireless charging, but its capacity is too small to be fully used, for example, it will charge the iPhone 13 only 70% in a single cycle.

FAQ: Frequent questions about charging iPhone from Power Bank Xiaomi