70mai devices — popular DVRs, home cameras and car accessories — require a smart charging approach to keep the battery lasting longer and the technology running smoothly. Many users face challenges ranging from slow charging to battery failure after months of use, often due to faulty use rather than marriage.
In this article, we will discuss all the charging methods for different 70mai models (from Dash Cam 1S to Omni), explain how to choose an adapter and cable, and reveal hidden settings in the firmware that affect the charging speed through the car lighter.
What 70mai devices require charging?
The 70mai line includes several types of gadgets, each of which has its own nuances of power:
- 🚗 Video Recorders: Dash Cam 1S/Pro/Pro+/Omni, A800/A810 — equipped with built-in batteries with a capacity from 300 before 500 (a) charge from the lighter or USB.
- 🏠 Home Cameras: Home Camera 2K/1080P, Pan/Tilt — network 5V, have a battery for autonomous operation (up to the 2 hours).
- 🔋 Portable accessories: Power Bank 70mai, Car Charger – can charge other devices, and themselves require recharging.
- 📱 Additional modules: GPS-Radar detector modules – powered by the main device, but sometimes need a separate charge.
Importantly, not all 70mai models have removable batteries, like the Dash Cam Pro+, which is soldered into the board, but Omni can replace it itself, which affects how you charge and care.
Official ways of charging: what Xiaomi says
The manufacturer recommends using only original or certified chargers with the following parameters:
- ⚡ Tension: 5V (±0.25V). Higher (9V/12V) damage to the power controller.
- 🔌 Current: 1A to 2.4A (depending on model) For example, Dash Cam 1S is charged with current 1A and A810 — 2A.
- 🔗 Cable: USB Type-C or Micro-USB (for older models) with data support (not all smartphone charging cables are suitable!).
The package comes with a short cable of 1-1.5 m in length if you need a longer one, choose certified versions with a USB 2.0 or USB 3.0 mark and a wire cross section of at least 24 AWG.
| Model of the device | Type of connector | Recommended charging current | Full charge time. |
|---|---|---|---|
| 70mai Dash Cam 1S | Micro-USB | 1A (5V/1A) | 2-3 hours |
| 70mai Pro/Pro+ | USB Type-C | 1.5A (5V/1.5A) | 1.5 hours to 2 hours |
| 70mai Omni | USB Type-C | 2A (5V/2A) | 1-1.5 hours |
| 70mai Home Camera 2K | USB Type-C | 2.4A (5V/2.4A) | 3-4 hours (reserve battery) |
⚠️ Note: Charging from a laptop or USB-hub 2–3 Time is longer due to current restriction (usually 0.5For fast charging, use an outlet or car adapter with an exit. 5V/2A.
Charging from the lighter of the car: nuances
The main way to power 70mai DVRs is through a lighter, but there are pitfalls here:
- Adapter quality: Cheap Chinese charging often produces unstable voltage (e.g. 6V instead of 5V), which shortens battery life.
- Registrar settings: Some models (e.g. Pro+) have a Power → Parking Mode, and if it's on, the device will run out even when the power is on.
- Salon temperature: In heat above +40°C or freezing below -10°C, the power controller can turn off charging to protect the battery.
To check if charging is going, look at the indicator:
- Red flashing - battery is discharged, charging is underway.
- Green constant - charging complete.
Yellow flashing – power error (check cable or adapter).
Start the engine of the car (voltage should be 12V+)
Use the original 70mai cable
Turn off parking in the settings
Check the indicator on the device-->
How to charge 70mai without a lighter: alternative methods
If you don’t have access to the car, you can charge the 70mai device in other ways:
- 🔌 From the socket 220V: Use the exit adapter 5V/1–2A (Charging from a Xiaomi or Redmi smartphone is fine — 1.5–3 hour.
- 💻 From the laptop./PC: Only in extreme cases - the current is limited. 0.5Ah, charging will take. 4–6 Put it in the port. USB 3.0 (blue).
- 🔋 From Power Bank: Choose models with Quick Charge or Power Delivery support (e.g. Xiaomi Mi Power Bank 3).
- ☀️ From solar panel: Suitable portable panels with output 5V (Xiaomi Solar Power Bank, but the charging speed will be low.
For 70mai home cameras (like Home Camera 2K), the battery backup is automatically charged when connected to the network. You don't need to turn the camera off the power - it controls the process itself.
What if the device is not charged by Power Bank?
Typical charging errors and how to avoid them
Even experienced users sometimes make mistakes that shorten battery life.
- Left-handed charging: Adapters without certification can produce power surges, causing the battery to bloat, and signs that the device is warming up more than usual.
- Charging at extreme temperatures: In the cold (-10 ° C and below), lithium-ion batteries lose capacity, and at +40 ° C and above - degrade 2 times faster.
- Permanent connection to the lighter: If the recorder is always on charge, the battery is in a state of “recharge”, which reduces its life, the optimal is to charge up to 80-90% and turn off.
- Ignoring firmware updates: Newer versions often optimize power algorithms, such as Dash Cam Pro+, which has been updated to version 3.12.0, patched a fast-discharge bug in parking mode.
Another common problem is that it's falsely displaying the charge level, like the device is 100 percent, but it shuts down after 5 minutes, and it's a sign of battery wear or a controller failure, and then calibration will help.
- Discharge the device until it is completely shut down.
- Charge to 100% without interruption (use original charging).
- Repeat the cycle 2-3 times.
⚠️ Note: If after calibration the problem remains, do not try to disassemble the device yourself - in the 70mai You use adhesives and you risk damaging the plumes. contact Xiaomi Service Center.
How to extend the life of a 70mai battery
The average battery life of 70mai devices is 2-3 years (300-500 charge cycles). To maximize it, follow these tips:
- 🔄 Avoid full discharges: Optimal range is 20-80%. Full discharge (0%) and overcharging (100%) reduce the resource.
- 🌡️ Control the temperature: Do not leave the recorder in direct sunlight on the dashboard. Use a sun visor in the heat.
- ⚡ Use smart charging: Adapters with Qualcomm Quick Charge support or USB-PD automatically select the optimal current.
- 🔧 Update your firmware: Newer versions often optimize power consumption. For example, Omni added a power saving mode after upgrading to 1.8.5.
For 70mai home cameras, it’s helpful to set up a work schedule, for example, if you don’t need the camera at night, turn it off via the Mi Home app, which will save you battery life.
💡
If you leave your car for a long time (for example, in a winter parking lot), remove the 70mai recorder and store it at +10... + 25 ° C with a charge of 40-60%, which will prevent deep discharge and damage to the battery.
What to do if the 70mai is not charging: diagnostics and solutions
If the device does not respond to the charging connection, act on the algorithm:
- Check the cable and adapter: Try charging another device (like a smartphone) if it's not charging, it's a problem charging.
- Check the connector: Micro-USB often accumulates dust or dirt. Clean it carefully with a toothpick (not metal objects!).
- Reset: For 70mai recorders, press the Reset button (near the connector) for 10 seconds. For cameras, turn off power for 30 seconds.
- Check the battery: If the device is powered only by the mains but does not hold charge, the battery is worn out. In models with a removable battery (for example, Omni), it can be replaced.
If nothing works, try flashing the device manually. Instructions and firmware for 70mai are available on the official 70mai.com website under Support → Firmware.
- MicroSD card (up to 32GB formatted in FAT32)
- Firmware file with.bin extension.
- Charging device (firmware should not be interrupted!).
⚠️ Warning: Unsolicited devices from unofficial sources may contain malicious code. 70mai or verified forums (e.g, 4PDA).
💡
If the device doesn't turn on after the firmware, wait 5-10 minutes - sometimes the first download takes longer.