How to turn off Xiaomi Verbank: step-by-step instructions for all models

Xiaomi’s power banks have become an integral part of the modern user’s life – they save smartphones, headphones and even laptops in the most unexpected situations. But what if your external Xiaomi battery does not turn off in a standard way or behaves unusually? In this article, we will discuss all possible methods of disconnection, including hidden functions, resetting, and solving typical problems.

Many users find that the power button on the Mi Power Bank or Redmi Power Bank is not responsive to clicks, and the indicators burn even after completely switching off the chargers. This does not always indicate a breakdown — often the problem lies in the wrong sequence of actions or features of a particular model. We have collected proven methods that work on 90% of the brand’s devices, including the latest versions with support for fast charging.

It is important to understand that the shutdown procedure may vary depending on the series of the superbank (for example, Mi Power Bank 3 Pro vs Redmi). 20000mAh) In this article, you'll find not only universal instructions, but also unique button combinations for models with displays and USB-C Ports that the manufacturer does not always advertise.

1. Standard way of turning off: power button

Most Xiaomi superbanks are equipped with a physical on/off button, which is located on the side or end panel.

1. Disconnect all cables from USB-Even if the device is not charging, the presence of a connected cord can block the shutdown.
2. Press the power button once on most models (e.g. Mi Power Bank). 2C or Redmi 10000mAh) The indicators will go out in 5-10 seconds.
3. If the lights continue to burn, hold the button for 3-5 seconds until completely shut down.

On models with a digital display (for example, Mi Power Bank 3 Pro) 20000mAh) You can have a menu after you press the button:

• 🔄 Press the button again to switch to the Power Off option.
• 🔘 Hold the 2 second button to confirm the shutdown.

⚠️ Attention: In some Redmi Power Bank batches 2021-2023, the power button may be "drowned" into the case. Check if the mechanism is clogged with dust - carefully clean the hole with a toothpick.

2. Forced shutdown: what to do if the button does not work

If Xiaomi’s overbank doesn’t respond to the press of a button, it could be due to:

• 🔋 Controller freeze (often after deep discharge or overheating).
• 💧 The ingestion of moisture on the board (even if external corrosion is not visible).
• 🔌 Short-circuit in USB-Ports due to unoriginal cables.

For forced shutdown, try the following methods:

Method 1: Discharge to zero

Connect a low-power device (such as a fitness bracelet or Bluetooth headphones) to the power bank and wait for full discharge.

1. Shut down all devices.
2. Connect the verbank to charging for 10-15 minutes, then disconnect.
3. Press the power button – the device must turn off.

Method 2: Button combination (for models with USB-C)

Xiaomi Power Delivery-enabled superbanks (such as Mi Power Bank 3 Pro) sometimes have a hidden combination:

Hold the power button + simultaneously insert/remove the USB-C cable 3 times in a row.

This method resets the power controller, but does not work on all devices.

⚠️ Note: If after a forced shutdown, the overbank does not turn back on, do not try to disassemble it yourself - this may lead to loss of warranty.

Check if the devices are connected to USB-port|

Make sure the lights are stable (do not flash)|

Try resetting the settings (see Section 4)|

Use the original Xiaomi cable for the test-->

3. Shutdown through resetting settings (Hard Reset)

If Xiaomi's power bank is unstable (it turns on itself, it doesn't hold a charge), it may require a complete reset, which will return the device to factory parameters, but will not affect battery capacity.

Instructions for most models:

1. Connect the power bank to a power source (charger or computer).
2. Hold the power button for 10-15 seconds until the indicators start flashing in non-standard mode (for example, all 4 LEDs will light up at the same time).
3. Release the button and wait until the device restarts (it will take up to 1 minute).
4. After the reboot, the verbank will automatically turn off.

For models with a display (Mi Power Bank 3 Pro, Redmi) 20000mAh):

• 🔧 Press the power button for 5 seconds until the menu appears on the screen.
• 🔄 Select Reset or Restore (navigation – short presses of the button).
• 🔘 Confirm reset by holding the button for 3 seconds.

💡

If the overbank discharges too quickly after reset, try to “swing” the battery: completely discharge it, then charge it to 100% without interruption. Repeat the cycle 2-3 times.

4. Features of turning off the superbanks with a display

Xiaomi models with digital screen (Mi Power Bank 3 Pro, Redmi) 20000mAh) They have advanced settings that can interfere with the standard shutdown, for example, if Low Power Mode is activated, the device will automatically turn on when the load is connected.

To completely disable such a verbank:

1. Press the power button once – the main menu will appear on the display.
2. Switch to Power Off (usually the second or third on the list) with short taps.
3. Hold the button 2-3 seconds for confirmation. The screen will go out, and after 5 seconds, the overbank itself will turn off.

If the screen is not responding:

• 🔌 Connect the verbank to the charger – sometimes it will “wake up” the display.
• 🔋 Try holding the power button for 20 seconds until forced reboot.
• 📱 If the screen shows an error (e.g., Error 02), it may indicate a controller malfunction – repairs are required.

5 Why Xiaomi's Verbank Doesn't Turn Off: Common Reasons

If your external Xiaomi battery ignores the shutdown commands, the problem may be:

Reason 1: Firmware freeze

The power controllers in Xiaomi's overbanks run on firmware that sometimes fail.

• 🔄 The endless blink of indicators.
• 🔋 Self-enabled when connecting to the network.
• 📉 Incorrect display of the charge level.

Solution: Reset settings (section 3) or update the firmware through official software (available only for models with a USB-C).

Reason 2: A button malfunction

Mechanical buttons wear out or stick over time.

• 🔊 There should be a clear click when pressed.
• 🕳️ The button should not “fall down” too easily or, conversely, require effort.

If the button is faulty, it can be replaced in the service center (the cost of repair is from 500 rubles).

Reason 3: Battery problems

When the battery is bloated or discharged, the controller may block the shutdown.

• 🔋 The body of the superbank is deformed (especially noticeable on the models of Mi Power Bank 2 with aluminum case).
• 🌡️ The device is very heated without loading.
• ⚡ Indicators show 0% charge, but after connecting to the network immediately "jump" 20-30%.

⚠️ Warning: If the body of the verbank is swelling, do not use it - it can lead to fire. Dispose of the device at special reception points (in Xiaomi stores or recycling centers).

💡

If the overbank doesn't turn off after all the manipulations, but it charges the devices normally - most likely the problem is in the firmware, not the hardware. Contact Xiaomi for a flashing controller.

6.Switch off Xiaomi’s powerbank via mobile app (for supported models)

Some Xiaomi Verbanks (e.g. Mi Smart Power Bank or Redmi) 20000mAh s NFC) Support control via the official Mi Home or Xiaomi Wear app, which allows you to turn off the device remotely if the physical button is not working.

Instructions:

1. Install the Mi Home app (available for Android and iOS).
2. Connect the Verbank to the application via Bluetooth or NFC (model).
3. Go to the device management section and find the Power Off option.

Limitations of the method:

• 📱 It only works on the poverbanks with Bluetooth or NFC (Check the characteristics of your model).
• 🔗 Requires a stable connection - if the overbank is discharged to 0%, the connection may be interrupted.
• 🔒 Some features can be blocked without authorization in Mi Account.

If your model does not support control through the application, but is equipped with USB-C, You can try an alternative method:

Connect the superbank to your computer via USB-C cable.


Open Device Manager (Windows) or System Information (macOS).




Find the device in the section "USB controllers" and disable it programmatically.

7.What to do if the Xiaomi overbank is turned off and does not turn on

The situation where the power bank suddenly shuts down and does not respond to the power button scares many users. 80% of the time, the problem is solved without repair.

Step 1: Checking the charge

Connect the powerbank to the original charger (preferably with Quick Charge 3.0 support) and leave for 1-2 hours. Sometimes a deep discharge blocks the power on until the battery voltage reaches the minimum threshold.

Step 2: “Wake up” the controller

If the indicators do not light up after charging:

• 🔌 Connect the verbank to another power source (e.g., to a power source) USB-port).
• 🔋 Hold the power button for 20–30 seconds (sometimes it takes up to a minute).
• 🔄 Try plugging in a load (like a smartphone) – some models turn on automatically when a device is detected.

Step 3: Diagnostics of malfunctions

If the verbank is not showing signs of life:

• 🕵️ Check if the indicator is red (this may indicate an error).
• 🔊 Listen - when connecting to the charging should be barely audible squeak (on some models).
• 🌡️ Check the temperature of the case – if it is cold, the protection against hypothermia may have worked.

⚠️ Note: If the Xiaomi overbank does not turn on after a fall or impact, do not disassemble it yourself - this can lead to a short circuit.

FAQ: Frequent questions about turning off Xiaomi's power banks