Wireless charging on Xiaomi Redmi Note 10S: how to turn on and use correctly

Introduction: Is wireless charging possible on the Redmi Note 10S?

Many Xiaomi Redmi Note 10S owners are wondering: Does their smartphone support wireless charging? This option is not specified in the model specifications, which causes confusion. In fact, the Redmi Note 10S does not have an integrated Qi charging module, but this does not mean that you can not use wireless technology. There are several proven ways to adapt the device to work with wireless charging stations, from external adapters to special cases.

In this article, we will discuss all available methods, their pros and cons, and give practical recommendations for choosing equipment, you will learn how to circumvent the limitations of the hardware of the smartphone without losing functionality, what accessories really work, and how to avoid typical errors in configuration.

Redmi Note 10S technical limitations: why there is no built-in wireless charging

The Redmi Note 10S (codenamed rosemary) was released in 2021 with a focus on price-performance balance. Unlike Xiaomi's flagship devices (like the Mi 11 or Mi 13), this series did not receive the built-in Qi-standard module for several reasons:

• 🔋 Space savings: the 8.3mm thick housing did not provide an additional layer for the wireless charging coil.
• 💰 Price policy: adding a module would increase the cost of the device by 15-20%, which would contradict the concept of the budget segment.
• ⚡ Priority of fast wired charging: the model supports 33W Fast Charging, which was considered sufficient for the target audience.

However, the absence of a built-in module does not mean complete incompatibility. Modern adapters and cases with support for Qi-protocol allow you to bypass this limitation. It is important to understand that the charging speed in this case will be lower than using the original charger (maximum 5-7W vs 33W over the wire).

How to add wireless charging to Redmi Note 10S

If you're determined to use wireless charging, consider three main methods, each with its own characteristics, advantages and disadvantages, depending on your priorities: convenience, charging speed, or maintaining the original design of the smartphone.

1.Covers with built-in Qi coil

The easiest and safest way to do this is to purchase a wireless charging case, which is mounted on the back of your smartphone and plugs into the USB-C connector via a flexible plume.

• 📱 Nillkin Magic Case – a thin case with support 5W, Compatible with most charging stations.
• 🔌 Spigen Wireless Charging Receiver is a universal adapter, suitable for Redmi Note 10S properly installed.
• 🔋 Baseus Wireless Charging Pad – complete with magnetic fastening for reliable fixation.

Advantages of the method: does not require disassembly of the device, is easy to remove, retains the warranty. Disadvantages: increases the thickness of the smartphone by 2-3 mm, can block access to the USB-C connector when connected.

External Qi receivers (stickers)

Thin flexible boards with a Qi receiver are glued to the back cover of the smartphone and connected to the USB-C port. They are less visible than covers, but require careful installation.

• 🧲 Yootech Wireless Charging Receiver 0.5 mm thick, supports 7.5W (for iPhone, but on Android it works on 5W.
• ⚡ Anker PowerWave Pad – compatible with most charging stations, including Xiaomi Mi Wireless Charger.

Important: When installing, avoid the bends of the plume and check the reliability of the attachment. Poor-quality stickers can fall off when heated or mechanically exposed.

Modification of the case (for advanced users)

This method involves disassembling a smartphone and installing an internal Qi module, requires electronics skills and voids warranty, and is only suitable for advanced users, as the risk of damage to the board or battery is extremely high.

Step-by-step: how to connect wireless charging through the case-adapter

So, let's take the most affordable and safe way to do this is to use a Qi case, and let's take the Nillkin Magic Case, but the algorithm will work for other adapters.

Backup data | Clear the USB-C connector of dust | Charge your smartphone to 50% | Prepare the charging station for the test-->

1. Remove the factory case (if installed) and clean the back of the smartphone of dust and grease. Use a lilaless napkin soaked in alcohol.
2. Connect the adapter plume to the USB-C connector. Make sure the connector is tightly in – backlash can cause contact loss.
3. Put your smartphone in a case, combining the camera and speaker holes, press the edges for a secure fix.
4. Place the device on the charging station. The charging icon should appear on the screen (usually in 5-10 seconds).

If charging does not start:

• 🔄 Reconnect the plume to the connector.
• 🔌 Try another charging station (not all models support it) 5W).
• 📱 Restart your smartphone – sometimes the system doesn’t recognize the new device right away.

💡

If the case interferes with the use of a USB-C connector for wired charging, select a model with a removable plume (for example, Spigen Wireless Charging Receiver), which allows you to quickly switch between charging methods.

Typical problems and their solutions

Even with the right adapter, users are struggling, and let's look at some of the most common scenarios and how to fix them.

⚠️ Warning: If the smartphone gets very hot during wireless charging (above 40)°C, stop the process immediately. Overheating can damage the battery and shorten its life. Use charging stations with vents.

If the problem persists, check:

• 🔋 Battery status (C Settings) → Battery check the wear level).
• 🔌 Charging station cable (must be original or certified).
• 📱 Software updates (in some firmware) MIUI There are bugs with recognition of Qi-devices).

Compatible charging stations: what to choose for the Redmi Note 10S

Not all wireless charging stations work equally well with adapters for the Redmi Note 10S.

• 🔌 Qi 1.2 or higher – older versions may not recognize adapters.
• ⚡ Power 10W+ — Even if the smartphone is charged on 5W, The power supply will ensure stability.
• 🧲 The presence of magnetic fixation – prevents the shift of the smartphone during charging.

Recommended models:

Avoid cheap no-name stations, which often don’t match the declared characteristics and can damage the battery.

💡

For maximum charging speed, use a station and an adapter from one manufacturer (e.g. Xiaomi + Nillkin) to minimize power loss during transmission.

Safety and care: how to extend the life of the battery

Wireless charging, especially through adapters, puts additional stress on the battery. To avoid premature wear, follow these guidelines:

• 🔋 Do not keep your smartphone on charging for more than 2-3 hours in a row, optimally - up to 80% and disconnect.
• ☀️ Avoid charging at temperatures above 30°C (for example, in the sun or near heaters).
• 📵 Do not use your smartphone for resource-intensive tasks (games, videos) while wirelessly charging.
• 🔄 Once a month, perform a full discharge/charging cycle (0–100%) to calibrate the controller.

⚠️ Note: If you notice that the battery is discharged faster than usual (for example, in 4-5 hours with moderate use), check its condition in the engineering menu. To do this, enter the phone code # #4636## and select "Battery Information". Health value below 80% suggests need for replacement.

Also, clean the adapter contacts and USB-C connector from dust regularly, using a wooden toothpick or a special brush - metal objects can damage the connector.

FAQ: Answers to Frequent Questions