Xiaomi Redmi Note 10 is equipped with fast charging technology (up to 33 watts depending on the modification), which allows you to restore battery power in minutes. However, many users prefer to turn off this feature to extend battery life or avoid overheating the device. In this article, we will discuss all the available ways to turn off turbocharging, from standard settings to hidden engineering menus.
It's important to understand that the manufacturer doesn't always provide direct access to this option. In some MIUI firmware, the function is hidden, and in others it is not at all. We have tested all methods on the Redmi Note 10/10 Pro/10S with the latest versions of MIUI (including MIUI 14 and HyperOS) and are ready to share working solutions. If you notice that the battery is quickly discharged or the phone is heating up during charging, this instruction will help optimize the process.
Why you should turn off turbocharging on the Redmi Note 10
Fast charging technology is convenient, but it has a downside, and here are the key reasons why users are abandoning it:
- 🔋 Battery degradation: Lithium-ion batteries wear out faster at high charging currents. Turborezhem reduces charge-discharge cycles by 15-20%.
- 🔥 Overheating of the device: With intensive charging, the body temperature can reach 40-45°C, which adversely affects the processor and other components.
- ⚡ Unstable power: In regions with frequent voltage surges, fast charging can cause power controller failures.
- 📉 Energy consumption: Turborezhim consumes more electricity, which is critical when charging from powerbank or weak sources.
Studies show that when you turn off fast charging and use standard mode (5V/2A), the Redmi Note 10 battery retains up to 85% of capacity after 500 cycles versus 70% when you use turbo mode all the time. However, you do not need to completely abandon fast charging - just use it situationally, for example, when you need to urgently recharge before leaving.
⚠️ Note: If you use a non-original charger, turning off turbocharging may be the only way to avoid damaging the power controller. Cheap adapters often do not match the declared performance and deliver unstable voltage.
Method 1: Disconnection through standard MIUI settings
The easiest way is to use the built-in system options. Unfortunately, in the latest versions of MIUI, this item may be hidden or missing, but on the Redmi Note 10 with firmware up to MIUI 13 it is available:
- Open Settings → Battery and Performance.
- Go to the Charging section (or Charging settings).
- Find the Fast Charging or Turbo Charging item and move the slider to the Off position.
If this is not the case, try an alternative route:
- 🔍 Go to Settings. → The phone. → Press 5-7 times on the version MIUI, activate the developer mode.
- Back to Settings → Additionally. → For developers.
- Scroll down and find the Charging Current Limitation or Charging Configuration.
On some firmware, after the turbo mode is turned off, the phone automatically switches to 10–18 watts of charging (depending on the power supply), a compromise that reduces battery load but does not turn off accelerated charging completely.
Charger connected to the original cable
Battery level not lower than 20%
The phone does not overheat (body temperature ≤ 35°C)
Backup of important data created (in case of failure)
-->
Method 2: Use of the MTK Engineer Mode
If the standard settings do not work, you can use the MediaTek engineering menu. This method works on the Redmi Note 10 with a Snapdragon 678 processor (models M2101K6G, M2101K6I) and requires caution - improper actions can lead to malfunctions in the power module.
Instructions:
- Open the Phone app and type the combination: ##4636## This will open the testing menu.
- Select Battery Information (Battery Information).
- Click on the three dots in the top right corner and select MTK Settings (if there is no item, your phone on Snapdragon – see the following method).
- Go to Charging Settings → Fast Charging and turn off the option.
After applying the changes, restart the device. If the engineering menu is missing or does not save the settings, this means that the manufacturer has blocked access to these parameters at the software level, in which case only changing the firmware or using third-party utilities will help (see Method 3).
⚠️ Note: In the engineering menu, do not change the parameters associated with Voltage and Current unless you are sure of their value.
Yeah, all the time.
Only at night.
Never turn it off.
I tried it, but I didn't notice the difference.
-->
Method 3: Forced power limitation (for advanced)
If the first two methods fail, the option is to use the ADB-This method requires unlocking Developer Options and connecting the phone to a PC.
Steps to limit charging power through ADB:
- Activate debugging over USB in the developer settings.
- Connect your phone to your computer and execute: adb shell settings put global fast_charge 0 This command disables fast charging at the system level.
- To apply the changes, restart the device.
Alternatively, you can use the AccuBattery app (available on Google Play), which doesn't turn off turbocharging completely, but allows you to:
- 📊 Monitor the actual charging speed and temperature.
- 🔋 Set charge limits (e.g. up to 80%).
- 🚨 Receive notifications of overheating or high current.
The app does not require root rights, but it may require a bootloader unlock to fully control charging. note that this voids the warranty and increases the risk of system damage.
What if after turning off the turbocharger, the phone charges too slowly?
Comparison of methods: which to choose
Each of these methods has its pros and cons, and in the table below we compare them by key parameters:
| Method | Difficulty | PC required | Risk to the system | Efficiency |
|---|---|---|---|---|
| Standard settings of MIUI | ⭐ (simple) | ❌ No. | ❌ No. | ⚠️ Medium (not always available) |
| Engineering menu | ⭐⭐ (middle-of-the-road) | ❌ No. | ⚠️ Low (with the right actions) | ✅ Tall. |
| ADB-team | ⭐⭐⭐ (difficult) | ✅ Yes. | ⚠️ Medium (in case of errors) | ✅ Tall. |
| Third-party annexes | ⭐ (simple) | ❌ No. | ❌ No. | ⚠️ Low (limited functionality) |
For most Redmi Note 10 users, the best solution is to combine the first and second method, and if you're ready to experiment, ADB is flexible, but requires technical skills, and remember that after the MIUI update, some settings can be reset — you have to reset them.
💡
To check if the turbocharger has actually turned off, use the Ampere app (Google Play), which shows the actual charging current in milliamperes. When the turbocharger is turned off, the value should not exceed 1500-1800 mA (for a 5V/2A unit).
Frequent Mistakes and How to Avoid Them
When you turn off turbocharging, users often face typical problems, and here are the most common ones and how to solve them:
- 🔄 Settings are not saved: After the restart, the turboreg is turned on again. This means that the changes are blocked at the firmware level. ADB Change the custom recovery (for example, TWRP).
- ⚡ Phone doesn't charge at all: You may have changed the critical settings in the engineering menu. → System system → Resetting settings.
- 📉 Charging speed unchanged: Check the power supply - some "smart" chargers ignore phone limitations (USB 2.0).
- 🔥 Overheating after turbocharging shutdown: Paradoxically, sometimes the problem lies in the background.Close all applications and check the temperature through Settings → The phone. → Status.
If neither method worked, the reason could be hardware locking at the level of the power controller, in which case only physical replacement of the charging board (which is impractical) or the use of an external powerbank with limited current will help.
💡
Turning off turbocharging does not increase the actual capacity of the battery, but only slows down its degradation, and the maximum effect is achieved when combined with other measures: avoiding full discharge, charging at room temperature (15-25 ° C), and using original accessories.