How to completely disable Xiaomi overbank: all the ways and precautions

Why it is important to turn off Xiaomi Verbank correctly

Xiaomi's external batteries are some of the most popular on the market, thanks to a combination of price, capacity and reliability. However, even a simple action like turning off the overbank, many users do the wrong thing, leading to accelerated discharge, overheating or even failure of the device, for example, if you just pull the cable out of the connector while you're charging your smartphone, it can trigger a power surge in the circuit and damage the power controller.

The feature of Xiaomi superbanks (including Mi Power Bank 3 Pro, Redmi Power Bank and Xiaomi Ultra Compact) is that they automatically turn off when inactivity – 30 to 60 seconds after the load stops. But this does not always work correctly, especially if the device is connected to the network or in Low Power Mode mode. In this article, we will discuss all possible ways to disconnect, including forced ones, and also explain how to avoid typical errors.

It's important to understand that not only can a battery be turned off incorrectly, it can also create a fire hazard, for example, if you leave a power bank plugged in for a long time, its electronic filling will heat up, which can cause the battery to bloat, so knowing all the nuances can save you money on repairing or buying a new device.

Method 1: Standard button disabling (for models with a physical button)

Most Xiaomi overbanks are equipped with a physical power button that is responsible for turning the device on/off. To completely turn off such an external battery, follow the following steps:

• 🔌 Disconnect all devices from USB-ports of the overbank (smartphone, headphones, fitness bracelet, etc.).
• ⚡ Make sure the charge indicators don’t flash (this means that the discharge or charge of the superbank itself is going on).
• 🖕 Press the power button for 3-5 seconds until all LEDs are out. In some models (for example, Mi Power Bank). 2S) You need to hold the button for up to 10 seconds.
• 🔍 Check that the verbank is really turned off: bring it to your ear - you should not hear a light squeak (typical for models with Smart). IC).

If the indicators continue to burn after holding the button, this may indicate that the controller is getting stuck, in which case, try to disconnect the overbank from the network (if it was connected to charging) and repeat the procedure. Also check if moisture has fallen under the button - this is a common cause of malfunction.

⚠️ Warning: Do not use sharp objects (knife, screwdriver, toothpick) to press the button, which can damage the mechanism of the button or puncture the body, which will lead to a short circuit.

Method 2: Automatic disabling without a button (for buttonless models)

Some modern Xiaomi power banks (e.g. Xiaomi Mi Ultra Compact 10000mAh or Redmi 20000mAh) do not have a physical on/off button. In such devices, the shutdown occurs automatically 30 to 90 seconds after the load stops. However, this mechanism does not always work perfectly.

1. Disconnect all connected gadgets from USB-port.
2. If the overbank is connected to the outlet (via an adapter), disconnect it from the network.
3. Wait 1-2 minutes. If the lights keep burning, move on to the next step.
4. Connect a low-consumption load to the poverbank (such as a wireless headphone or fitness bracelet) and immediately turn it off. This will reset the auto-disconnect timer.

If the overbank still doesn't turn off, it could be due to a power controller malfunction or a deep battery drain, in which case you might try to plug it into a charge for 10 to 15 minutes, then turn it off again, and usually after that, the automatic shutdown starts working correctly.

Method 3: Disconnect via mobile app (for smart verbanks)

Some Xiaomi superbank models (such as Mi Smart Power Bank or Xiaomi Mi Wireless Power Bank) support management through the branded Mi Home app (now Xiaomi Home), which allows you not only to monitor the charge level, but also remotely disable the device.

• 📱 Install the Xiaomi Home app from Google Play or the App Store.
• 🔗 Connect the verbank to the application via Bluetooth (the pairing instructions are usually included in the package).
• 🔄 In the main menu of the application, find your superbank and go to its settings.
• ⏻ Click on the Turn Off or Sleep Mode button (depending on the model).

Note that for this function, the overbank must have a residual charge of at least 10%. If the battery is discharged more severely, the application may not display the device or respond to commands. Also, some users face a problem when the overbank does not connect to the application after updating the firmware, in which case resetting the device settings (usually performed by holding the power button for a long time) will help.

⚠️ Note: If the overbank continues to drain after disconnecting through the application, this may indicate the background processes of the controller).

Method 4: Forced shutdown when getting stuck

Sometimes Xiaomi power banks "hang" - the indicators are constantly on, the device does not respond to the power button and does not turn off automatically. This can occur due to a voltage surge, overheating or a failure of the controller firmware, in which case a forced reset will help:

1. Disconnect all cables from the overbank (incoming and weekend).
2. If the model has a button, hold it for 15-20 seconds. For buttonless devices, move on to the next step.
3. Connect the verbank to a low-current power source (e.g., to a USB-port of the laptop or adapter 5V/1A) And turn it off. That'll reset the controller.
4. If nothing works, leave the overbank to run completely (up to 0%) and then plug it into the charger, which restores performance in 80% of cases.

If the overbank does not turn off after these manipulations, this may indicate a malfunction of the battery cells or damage to the control board, in which case it is better to contact the service center, especially if the device is heated above 50 ° C or makes extraneous sounds (cracking, hissing). Self-repair without special skills can be dangerous!

💡

If the overbank is frozen after a fall or impact, do not try to disassemble it yourself. Lithium-ion batteries can ignite if mechanically damaged, you better place the device in a non-combustible container (for example, a metal pelvis) and take it to the service.

Method 5: Disconnect from the network (if the overbank is connected to the outlet)

Many users leave Xiaomi's power banks plugged in for a long time, which is highly discouraged, and the constant charge reduces battery life and increases the risk of overheating, to properly disconnect the power bank from the grid:

• ⚡ First, disconnect all devices that were charged from the superbank.
• 🕒 Wait for the lights to show 100% charge (all LEDs are constantly on fire).
• 🔌 Pull the adapter plug out of the socket, and then disconnect the cable from the overbank.
• 🔄 If the overbank supports Passthrough (simultaneous charging of yourself and connected devices), before disconnecting from the network, first disconnect all gadgets from it. USB-port.

Important: Do not disconnect the power outlet during active charging (when the lights flash), this can lead to incomplete charge of the cells, which over time reduces their capacity, and avoid using non-original power adapters - they can apply the wrong voltage, which will cause the controller of the overbank to work incorrectly.

Frequent Mistakes and How to Avoid Them

Even experienced users sometimes make mistakes when handling Xiaomi overbanks, which leads to their premature failure.

• 🔥 Overheating: Do not leave the overbank in direct sunlight or near heat sources (battery, heater).°C.
• 💧 Moisture: Do not use the device in wet areas (bathroom, pools) or in the rain.Even if the case seems sealed, contacts USB-Ports are not protected from corrosion.
• 🔋 Deep discharge: Try not to discharge the overbank to 0%. Optimal range is 20-80%. Store the device for longer than a month is recommended with a charge of 40-60%.
• ⚡ Incompatible cables: Use only certified cables USB-C Or Micro-USB (depending on the model), cheap Chinese cords can be too high to withstand high currents and melt.

Another common mistake is to use the power bank as a permanent power source (for example, for a router or a security camera), which leads to cyclical recharging, which is detrimental to lithium-ion batteries. If you want a backup power source for a stationary device, you better buy a UPS (uninterruptible power source).

💡

Xiaomi power banks are not designed for round-the-clock operation; their task is to recharge gadgets for a short time. Constant load reduces the battery life by 2-3 times.

FAQ: Answers to popular questions