Why does Power Bank Xiaomi 10000 not turn off like a regular technique?
Owners of Xiaomi's 10,000mAh external batteries often face the unexpected: the device doesn't shut down like a smartphone or laptop, it's all about the architecture of power banks — they're designed to keep the battery running low in standby mode to keep the charge for months. But what if you want to completely de-energize the device, like before long-term storage or transportation in your luggage?
In this article, we’ll cover all the official and covert shutdowns for the Mi Power Bank 2/3 Pro, Redmi Power Bank and other 10,000mAh models, and explain why some methods (like battery removal) can permanently shut down a device—and what to do instead.
Spoiler: 90% of the time, hold the power button for 5-8 seconds, but there are nuances for different firmware versions and hardware revisions, and then you have the details of the photo, video and compatibility table.
Method 1: Standard button-off (for most models)
The most obvious method runs on Mi Power Bank 2 (PLM03ZM), Mi Power Bank 3 Pro (PLM13ZM) and Redmi Power Bank 10000.
- Make sure that no devices are connected to the power bank (either via USB or Type-C).
- Find the power button – it is usually located on the end of the case next to the charge indicators.
- Press the button for 5-8 seconds until all LEDs are out.
⚠️ Warning: If the lights flash red after holding the button, it is a low charge signal (less than 5%), in which case the power bank will automatically shut down after 30 seconds, but before storing it, you must charge it to 30-50%!
☑️ Pre-off check
On some models (for example, Mi Power Bank 3 Pro with display) after holding the button, the inscription Power Off may appear.
Method 2: Forced shutdown when “hanging”
If the power bank doesn't respond to the button, flashes randomly, or gives out a charging error, it's likely that the controller has failed, and then the hardware reset will help.
- Disconnect all cables from USB and Type-C ports.
- Press the power button for 10-15 seconds (until the indicators are completely quenched).
- If the LEDs continue to burn, connect the power bank to the charger (5V/2A) and repeat the button retention.
🔋 Why does it work? When you plug in to a power source, the controller resets the errors and returns to normal mode, which helps even if the power bank doesn't turn on after the zero discharge».
What if the reset didn't help?
Method 3: Turn off via mobile app (smart models only)
Mi Power Bank 3 Pro 10000 models with Bluetooth module support control via the Mi Home app (available for Android and iOS).
- Connect the power bank to the application (instructions in Add Device → Power Bank).
- Go to the device settings and find the option to turn off or sleep.
- Confirm the action - the indicators will go out in 2-3 seconds.
⚠️ Warning: After a remote shutdown, the power bank cannot be stored discharged for more than 3 months. The internal battery can degrade due to deep discharge. The optimal level for storage is 40-60%.
Table: Compatibility of shutdown methods with Xiaomi models
| Model | Button (5-8 seconds) | Hardware reset (10+ sec) | Mi Home appendix | Auto-disconnection at discharge |
|---|---|---|---|---|
| Mi Power Bank 2 (PLM03ZM) | ✅ Yes. | ✅ Yes. | ❌ No. | ✅ Yes. <5%) |
| Mi Power Bank 3 Pro (PLM13ZM) | ✅ Yes. | ✅ Yes. | ✅ Yeah) | ✅ Yes. <3%) |
| Redmi Power Bank 10000 (PB100LZM) | ✅ Yes. | ⚠️ Partially (needs a power source) | ❌ No. | ✅ Yes. <5%) |
| Mi Power Bank 1C (USB-C) | ✅ Yes. | ✅ Yes. | ❌ No. | ✅ Yes. <5%) |
💡 Lifehack: If your model doesn't support shutting down through the app, but there's Bluetooth, try updating the firmware through Mi Home.
What happens if you don’t turn off the power bank before storage?
Many users leave Xiaomi Power Bank on the shelf without thinking about the consequences, while prolonged storage in the on state leads to:
- 🔋 Deep discharge - if the charge falls below 2.7V, The controller can lock the battery permanently.
- 🔥 Cell damage – Lithium polymer batteries degrade faster at 100% or 0% charge.
- ⚡ Spontaneous switching on – when vibrating (for example, in a backpack), the power bank can be activated and discharged.
📌 Optimal storage conditions:
- Charge: 40-60% (check once every 3 months).
- Temperature: 10–25°C (not in the refrigerator or in the sun!)
- State: off (hold the button until the indicators are turned off).
💡
Store Xiaomi powerbank with a full charge (100%) is as harmful as discharged (0%), Optimally - 40-60% and turned off.
Frequent Mistakes and How to Avoid Them
Even experienced users sometimes make mistakes when working with Xiaomi Power Bank.
- Use of unoriginal cables – cheap wires can cause a controller to fail, which will not shut down the power bank. Always use cables that support Quick Charge 3.0 or the original from Xiaomi.
- Storage in a case -- if the power bank stays in a tight case or bag, it can overheat and turn on spontaneously. Store in a ventilated place.
- Ignoring the red light — if the LEDs flash red, it's a critical discharge signal. Connect to charging immediately, or the battery will fail.
⚠️ Warning: If the power bank turns on itself when you connect the device, it is not a breakdown, but an autostart function. To turn it off, hold the power button after connecting the cable for 3 seconds.
💡
Before a long trip (for example, on vacation), check the power bank for spontaneous switching on: shake it or slightly hit the case with your palm. If the indicators light up, the device must be turned off forcibly (method 2).