How to turn off fast charging on Xiaomi Mi 10T Pro: the full guide

Xiaomi Mi 10T Pro series smartphones feature an advanced power system that supports 33W Fast Charge technology, which allows you to recharge the battery capacity at an incredible speed, which is a huge advantage for active users. However, in certain situations, such as when charging at night or in hot weather, high speed can lead to excessive heating of the case.

Many flagship owners are wondering how to forcely limit the power of a charger. The standard Android settings menu or MIUI shell doesn't contain an obvious switch for this feature.

However, there are proven ways to get around this limitation. In this article, we will detail methods for deactivating accelerated charging using both built-in system functions and special engineering codes. You will learn how to manage the power consumption of your gadget to extend the life of a lithium polymer battery.

Why you might need to turn off Turbo Charge

Maximum charging power is not always a long-term option. When you connect the Xiaomi Mi 10T Pro to the grid overnight, the rate of recharge is overshadowed, at which point it is more important to minimize heat generation and reduce the load on the chemicals inside the battery.

High temperature is the main enemy of modern batteries. Constant heating to 40-45 degrees Celsius during night charging accelerates the degradation of the electrolyte. Turning off Turbo Charge mode allows the device to charge at a more gentle pace, which positively affects the overall life.

⚠️ Attention: Long-term use of the smartphone at high temperatures can lead not only to battery wear, but also to the stratification of the adhesive layer of the display.

There are also scenarios where you only have a weak power supply or an old one on hand. USB-In such cases, the system may attempt to start the fast charging protocol, but due to a lack of power, the process will be unstable.

It’s also worth considering that some users prefer to charge the device slowly so they can use it during the process without the risk of a quick discharge. In normal mode, the smartphone warms much less, which makes it more comfortable to work with.

Checking the current charging speed and status

Before you make any changes to your system, you need to make sure that the fast charging function is really active. On the Xiaomi Mi 10T Pro, it is signaled by a special animation on the locked screen. If you see a lightning icon and the words "Mi Turbo Charge", then the protocol is activated.

For more detailed analysis, you can use the built-in engineering menu or third-party utilities, which will allow you to track not only the activation, but also the actual strength of the current coming on the board, which is useful for diagnosing faults in the cable or charging unit.

🔌 Connect the original charger and pay attention to the lock screen.
📱 Go to the battery settings via the Settings menu → Battery.
📊 Use apps like AccuBattery to monitor real-time.

It is important to understand the difference between conventional fast charging and Quick Charge technology. On Xiaomi devices, these protocols can work in parallel, but are controlled by different controllers. Disabling one does not always guarantee the other to turn off, so it is important to check the final result experimentally.

If the screen displays standard lightning without the words "Turbo" or "Fast", then the phone has switched to normal charging mode with a current of 10-12 watts.

Disconnection method through developer settings

The safest and most affordable way to manage system functions is to use a developer menu. MIUI hidden parameters that allow to influence behavior USB-Although there may not be a direct "Disable Fast Charging" button, the connectivity functions may be limited.

First, you need to activate the hidden mode. Go to the Settings section. → About the phone and find the line "Version" MIUI". Press it. 7-10 once in a row before the message "You became a developer" appears, and then a new item will appear in the main settings menu.

☑️ Activation of the developer mode

Open phone settings:Find MIUI version:Click 7 times:Check the new menu

Done: 0 / 1

In the Developer menu that opens, scroll through the list to the USB section, where you can find options like "Default USB Configuration," which can cause your phone to ignore requests for increased voltage from the charger.

However, it is worth noting that in the latest versions of the MIUI 12 and MIUI 13 firmware, which are relevant for the Mi 10T Pro, some of these options have been hidden or renamed. If you did not find the right switch, this means that the manufacturer has blocked the program access to this option at the user interface level.

⚠️ Note: Do not change the settings that you are not sure about, especially those related to debugging. USB, This can disrupt synchronization with the computer.

The alternative is to set a charge limit, and some automation scenarios allow charging to stop when it reaches 80%, which indirectly solves the problem of overheating, although it does not disable the Turbo Charge protocol itself.

Using engineering code for diagnostics

If standard methods fail, engineering codes come to the rescue. On Xiaomi smartphones, there is a special set of commands that allows you to access hidden hardware tests, entered through the Phone application, in the dialing field.

One of the most useful codes for diagnosing the battery is ##6485##. Once you enter this combination, you open the Battery Info menu, and you can see a variety of parameters, including the current temperature, wear level and type of charger connected.

Parameter	Description	Normal value.
MB_06	Battery status	Good
MF_05	Current temperature	25-35 °C
MF_02	Charge level	0-100%
MB_00	Percentage of charge	Digital value

Unfortunately, it is often impossible to directly disable the Turbo Charge through this menu on global firmware versions. However, here you can check if the phone sees the original charger. If the logs show an error or an incorrect type of battery, the problem may be in the contacts, not in the software settings.

What if the code doesn't work?

If nothing happens after you enter the code, make sure you use the Phone app instead of contact search. On some versions of MIUI, the code can be changed to ##4636## or completely blocked by the carrier.> There is also #4636### that opens the testing menu. In the Battery Information section, you can sometimes find more detailed connection logs. Experienced users use this data to make a decision about replacing the cable or cleaning the connector. Use third-party apps to control Because the built-in tools Xiaomi flexibly manage charging, it is difficult to take the test menu. One of the popular solutions is to use alarm apps with charge control, which is to charge up to 80 percent, then stop, 75 percent, charge again, and prevent overheating and chemical degradation, which is typical of being at 100%. 🛠 Battery Charge Limit – requires root rights but gives full control. ⚡ AccuBattery – excellent monitoring and sound notifications. 🔋 MacroDroid allows you to create complex automation scenarios. Software like Battery Charge Limit often requires superuser rights (Root) to run. 10T Pro is possible through unlocking the bootloader, but this voids the warranty and can disrupt the operation of banking applications (NFC If you don’t want to risk the guarantee, use scripting apps. For example, MacroDroid can create a macro: "If the time is between 23:00 and 07:00 And charging goes → Enable the charging speed" This software will limit the background processes and reduce heating. There are special cables with an integrated chip that limits the current at 1-2 Amps. This hardware solution that makes any smartphone, including Xiaomi, charge slowly, as the controller sees the limit of the line. The effect of accessories on the charging speed The easiest and reliable way to disable fast charging on the Xiaomi Mi 10T Pro is to use neooriginal charging at the Charges, such as the QuickGenerion Protocol, Charges require fast charging. If you use an old 5W (1 Amp) power supply or a cheap cable without proper labeling, the phone will automatically go to normal charging mode.This is absolutely safe and guaranteed to prevent heating. It can be a power supply from an old smartphone or a car charging with one. USB-The key is that they don't support modern voltage protocols. ⚠️ Attention: Using damaged cables with broken insulation can lead to short circuits. Make sure the accessory is in good working order, even if it is old. There are also smart sockets with consumption measurement. By setting the script in the socket application, you can turn off the power of the phone immediately after reaching a certain level of charge, which also solves the problem of night overheating. It's the one that can transmit high power currents. Replacing it with a regular black cable from a third-party is a surefire way to reduce charge speed. Optimizing MIUI settings to reduce heat Even if you don't completely turn off the fast charging protocol, you can minimize its negative effects through system optimization. The MIUI shell has many features that collectively reduce heat generation. First of all, turn off unnecessary functions during charging. Bluetooth, GPS and 5G network search consume significant energy and heat up the processor. Turn on Flight mode or at least turn off mobile data transfer overnight. Also, check the list of recent autoloading processes before starting the application. In the Settings section → Battery → Screenshots (or similar, depending on version) MIUI) Sometimes you see the feature "Optimize night charging." It learns your habits and pauses charging at 80%, completing the process only before you wake up. Remember to update the system. Xiaomi engineers regularly release patches that improve thermoregulation algorithms. 10T There have been cases where, after the update, MIUI The phone started charging more "cold-blooded." Frequently asked questions (FAQ) Is it safe to charge Xiaomi Mi constantly? 10T Pro at top speed? Technically, the smartphone is overheated and will shut off current at critical temperatures. However, for the long-term health of the lithium battery, constant heating to 40+ It's not desirable and it speeds up wear. MIUI The fast-charging animation is missing? It could be a software failure or a change in the algorithms of the power controller. Try to clear the cache of the Security app or reset the date and time settings. Also check the integrity of the connector. Can turning off fast charging improve the performance of games? No, these processes are independent. However, reducing the temperature of the case during charging can prevent trottling (reducing the CPU frequency) in heavy games if you play simultaneously with charging. Which cable will exactly turn off the Turbo Charge? Any cable that does not support current more than 2A or does not have the appropriate labeling (for example, old cables are independent of the micro-USB), or will cause the modern phone to stop using a low-power mode during the transfer of the night. It's not so much time that causes harm as micro-cycles of charging and heating, and using a timer socket or charging optimization fixes this problem.