How to calibrate the battery on Xiaomi Redmi Note 4: 3 working methods + FAQ

Why is battery calibration important for the Redmi Note 4?

Owners of Xiaomi Redmi Note 4 often face a problem: the phone suddenly turns off at 20-30% charge or, conversely, shows 1% and works for another hour. It is not a battery failure, but a failure of the battery controller - a chip that tracks the real level of charge. Over time, due to incomplete charging cycles, the use of non-original chargers or deep discharges, the controller data "disintegrates" with the actual state of the battery.

Calibration is the reset of controller statistics and forced synchronization of metrics. on the Redmi Note 4 (mido models mido_global) The procedure has nuances due to the features of the firmware MIUI and Qualcomm Snapdragon hardware platform 625. For example, on devices with custom firmware (such as LineageOS), methods differ from standard ones.

It's important to understand that calibration doesn't restore battery capacity or eliminate physical wear, it only corrects the error in charge display. If after the procedure the phone still runs out in 2-3 hours, the problem is battery degradation, it's time to replace it.

Signs that the battery needs calibration

How do you tell if the Redmi Note 4's battery controller is failing?

• 🔋 The phone turns off when 15-30% charge, and after connecting charging shows 0% and immediately switch on.
• 📉 The percentage of charge jumps – for example, from 45% immediately to 20% without using it.
• ⚡ After full charge (100%) phone discharges to 80-90% post 10-15 minutia.
• 🔄 B Settings → Battery → Battery status is displayed as inadequate running time (e.g., "20 hours left" at 50%).
• 🔌 Charging is jerky: it quickly gains interest, then “freezes” on one value.

If you know any of these, it's time to calibrate. But first check the battery's physical condition: look at Settings → Phone → Battery status. If it says "Good" but you have symptoms, it's the controller's fault. If the "Replace soon" status is meaningless, you need a replacement.

Method 1: Software calibration via MIUI (without root)

The safest way to do this is to run on any MIUI firmware (including MIUI 12/13/14), which does not require super-user rights and is suitable for most users, and is a full discharge-charging cycle, taking into account the characteristics of the Qualcomm controller.

You'll need:

• ⚡ Original Charger (5V/2A or 9V/2A).
• ⏱ Time is no less. 8-10 hours (the process cannot be interrupted!).
• 📵 Turn off all notifications and background processes (Settings) → Annexes → Auto-start).

Step-by-step:

1. Charge your phone to 100% (use the original adapter) and wait for the message "Charge complete".
2. Turn off charging and use the phone as normal until it’s down to 0% and off.
3. Don't turn on your phone! Connect the charger and hold for 3-4 hours (even if 100% appears on the screen).
4. Turn on the phone, go to Settings → Battery → Usage Statistics and reset data (Reset battery statistics).
5. Repeat the discharge-charging cycle 1-2 more times to consolidate the result.

Charge to 100% zoo|Discharge before automatic shutdown|Charge the phone off 3-4 hour|Reset battery statistics in settings|Repeat the cycle 2 once-->

⚠️ Note: If after calibration the phone is switched off 10-15%, The problem may be battery wear (capacity below). 70% Check it out through the AccuBattery app (available on Google Play).

Method 2: Calibration through ADB (for advanced users)

This is a good way to do it if the software calibration doesn't work, and it requires a USB debugging mode and a computer with ADB drivers installed. It resets the data from the batterystats.bin file, where the controller statistics are stored.

Warning: Incorrect ADB commands may disrupt the system. Follow the instructions carefully.

Steps:

1. Turn on Developer Mode: Go to Settings → About Phone and click on MIUI Version 7 times.
2. Return to Settings → Additional → For developers and activate Debugging over USB.
3. Connect your phone to your PC, open the command line (Win + R → cmd) and type: adb devices If the device is displayed, the drivers are installed correctly.
4. Follow the commands in order: adb shell su rm /data/system/batterystats.bin reboot If no root rights are available, skip the su line.
5. After restarting, fully discharge and charge your phone (as in Method 1).

🔹 Note: On some versions MIUI file batterystats.bin It can recover automatically after rebooting, and only manual calibration through recovery will help. 3).

Method 3: Calibration with TWRP Recovery (for root users)

The most radical, but also the most effective method is to reset the battery data via custom recovery. Requires TWRP installed and superuser rights. Suitable for the Redmi Note 4 with an unlocked bootloader.

Important: Before the procedure, make a backup of the data (Nandroid backup) in TWRP, as there is a risk of system failure.

Instructions:

1. Turn off your phone and press Volume Up + Power to enter TWRP.
2. Go to Advanced → File Manager.
3. Find the file /data/system/batterystats.bin and delete it.
4. Go back to the main menu, select Wipe → Advanced Wipe and select Battery Stats (if any).
5. Reboot to the system and complete 3 full discharge-charging cycles.

⚠️ Note: If after calibration, TWRP phone stopped turning on, system files may have been damaged. MIUI via Fastboot.

💡

If the battery drains too quickly after calibration, check the background processes through Greenify or Battery Guru. Often unoptimized applications are to blame, not the battery itself.

Table: Comparison of calibration methods

As you can see from the table, the TWRP method is the best, but it requires technical skills. If you're not sure, start with software calibration.

Frequent Mistakes and How to Avoid Them

Many users make mistakes that nullify their efforts, and here are the most common ones:

• 🔌 Use a non-original charger. Cheap, unstable-voltage RAMs spoil the battery controller. Use only Xiaomi adapters (5V/2A or 9V/2A).
• 🔄 Calibration on custom firmware without patches. On some builds of LineageOS or AOSP The battery controller works differently. Make sure the firmware supports Qualcomm-compatible commands.

⚠️ Warning: If after calibration, the phone starts to overheat or the battery swells, immediately disconnect it from the grid! These are signs of critical battery wear that may ignite. Replace the battery at the service center.

FAQ: Answers to Frequent Questions

💡

Calibration of the battery on the Redmi Note 4 only corrects the error of display charge, but does not restore physical capacity. If the battery is worn out (>60% degradation), the only solution is to replace.