How to activate wireless charging on your Xiaomi phone

The Chinese manufacturer’s flagship smartphones are no longer just communication devices, becoming powerful multimedia centers with advanced power consumption technologies. One of these advanced features is the ability to share energy with other gadgets without using wires, which is especially true in the ecosystem of smart devices. Many users do not even suspect that their device is able to charge headphones, smart watches or other phone lying on its back cover.

Enabling this option does not require deep technical knowledge or third-party software installation, since all the necessary tools are already built into the MIUI or HyperOS shell. However, in order for the process to be successful and safe for both devices, you need to know certain nuances of the configuration and compatibility limitations of models. We will analyze all aspects of the induction module so that you can maximize the use of your device.

It should be noted that not all models support this feature, as it requires special hardware inside the case. Usually we are talking about the flagship series Mi, Xiaomi and some representatives of the line of Redmi Note Pro, equipped with the appropriate modules. If you plan to use your smartphone as a powerbank, make sure that the specification of your device includes reverse charging technology.

Verification of compatibility and hardware requirements

The first step before activating any function should always be to check the technical feasibility of the device. In the case of power transmission through the air, it is critical to have an induction coil operating in the mode of the emitter, not just the receiver. Conventional budget models often do not have this component to reduce the cost, so finding a setting in the menu may not give results.

You can determine the availability of support by looking at official documentation or specifications on the manufacturer's website. It is also worth considering that even with a module, the power transfer rate can vary depending on the firmware version and the specific modification of the processor. Xiaomi implements this technology selectively, mainly in devices of the upper price segment.

Below is a table showing popular models and their reverse charging support status, and the data is relevant for the latest software versions.

If your model is not listed or listed as non-supportive, software activation methods will not help, in which case the only solution is to use external accessories or wired adapters.

Activation through the control and settings center

The fastest way to start power distribution mode is to use a notification curtain, which requires swiping from top to bottom across the screen to open the Quick Settings panel, and you should look for an item called Reverse Wireless Charging or similar icon list.

If the icon is missing from the first menu, you need to click on a pencil or edit button to go to the full list of available widgets. Once you find the right item, drag it to the active zone for quick access in the future. Once you click on the icon, the system will issue a battery consumption warning, which the module will launch confirmation.

An alternative route is through the main menu of system parameters, and you'll need to go to the Battery section and then find the switch that transmits power, and the path may vary slightly depending on the version of the shell, but the logic remains the same for all the devices of the brand.

⚠️ Warning: Activation of the mode significantly accelerates the discharge of the main battery and can cause heating of the body, so do not leave the device unattended for a long time.

Set up thresholds and limitations

In advanced versions of the operating system, users have more subtle control over the power transfer process, allowing them to set limits when the current is automatically stopped, a useful feature that allows them to avoid being left with a completely discharged main device.

Usually the settings are in the same menu where the function is turned on, you can choose the percentage of charge below which the phone will stop giving power to an external consumer, the standard value is often a level of 20-30%, but it can be changed manually.

And you also have to consider the temperature, and if the case gets hotter than the critical point, the system will force the induction module to protect the internal components, which is a standard behavior, not a software bug.

Connection process and accessory compatibility

To start the transmission of power, you need to position the devices correctly relative to each other. The centers of the coils must be as close as possible, which usually means putting the backs on each other. Accurate positioning is critical, because even a few millimeters of displacement can interrupt contact.

Modern smartphones support the Qi standard, which ensures compatibility with a wide range of gadgets.You can charge not only other phones, but also wearable electronics such as fitness bracelets, smart watches and wireless headphones in the case.

• 📱 Smartphones of any brands with support for Qi-standard.
• ⌚ Smart watches and fitness trackers with wireless charging.
• 🎧 Headphones TWS charger.

When the donor device is connected, it will emit an audible signal or vibration to confirm the start of the process. Animations may appear on the screen that display the level of energy transferred. If the devices do not respond, try changing their position or removing the covers.

⚠️ Note: Do not place foreign metal objects such as keys or coins between devices, as they can heat up and damage the surface or electronics.

Diagnostics of problems and troubleshooting

Despite the technology's fine-tuning, users may encounter situations where charging doesn't start or interrupts, most often the problem is incorrect positioning or obstruction between the coils, and make sure that the device's cameras don't interfere with the tight fit.

Another common cause is a software failure in the power controller, in which case a simple reboot of the device helps, and if the problem persists after a restart, it is worth checking for system updates, since manufacturers often release patches that correct energy management errors.

Sometimes the module may not be activated because of the donor's low battery charge, and the system will block the energy output if the charge level falls below the minimum threshold, usually 20-25%, in which case the main unit must be recharged from the main network first.

💡

To speed up the charging process of another device, it is recommended to put the donor phone into flight mode or turn off the screen to reduce its own power consumption.

Optimization and impact on battery life

Frequent use of reverse charging can affect the overall condition of the battery. High currents and heating are natural enemies of lithium-polymer batteries. Regular overheating can accelerate the degradation of the capacity, so abuse of the function is not recommended.

Use this feature mainly in emergency situations, when there is no network adapter at hand, and another device urgently needs power. For everyday use, it is better to resort to classic wired methods or external power banks.

However, for modern flagships, this feature is a convenient addition to keep wearable electronics running throughout the day.With a reasonable approach, you can evaluate the convenience of the technology without significant harm to the main gadget.

💡

Reverse charging is a convenient emergency function, but not a replacement for a full charger due to power loss during transmission.

Frequently asked questions