Wireless charging has become an integral part of modern smartphones, offering convenience and minimizing wear and tear of the USB-C connector. Owners of Xiaomi devices often face the question: how to activate this feature if it does not work out of the box? In this article, we will analyze not only the standard process of inclusion, but also nuances that the manufacturer does not always advertise.
It’s important to understand that not all Xiaomi models support wireless charging, even among flagship lines. For example, the Xiaomi 13 Ultra is equipped with this technology, and the POCO X5 Pro is not. We will help determine the compatibility of your device, tell you which accessories to choose, and explain why sometimes charging does not start the right settings, and you will learn about the hidden parameters of the system that affect the charging speed, and how to circumvent common limitations.
What Xiaomi models support wireless charging
The Qi wireless charging technology is not available in all Xiaomi smartphones, and the manufacturer is implementing it mainly in premium and some mid-budget models, below is the current list of devices with wireless charging support (as of 2026):
- 📱 Xiaomi 14 Pro / Xiaomi 14 Ultra – up to 50 W (with a proprietary station)
- 📱 Xiaomi 13 Pro / Xiaomi 13 Ultra – up to 50 watts
- 📱 Xiaomi 12 Pro / Xiaomi 12S Ultra - up to 50 watts
- 📱 Xiaomi Mix 4 - up to 50 watts
- 📱 Xiaomi Mi 11 Ultra – up to 67 watts (record for the series)
- 📱 Redmi K60 Ultra - up to 30 watts
- 📱 POCO F5 Pro – up to 30 W (rare for subbrands)
Important: Redmi Note models and most POCO devices do not support wireless charging — even if the specifications indicate “fast charging” — this is due to cost optimization and the target audience of budget smartphones. To know exactly if there is a feature in your device, check the official model page on the Xiaomi website or use the AIDA64 app (Battery section).
If your model is not on the list, but you want to try wireless charging, you can use adapters with a Qi receiver that connect to the USB-C connector. However, this method has limitations: the charging speed will not exceed 5-7 watts, and the adapter itself will take up space and spoil the aesthetics of the device.
How to check if wireless charging is enabled on Xiaomi
Before you set up the feature, make sure it's activated. In most cases, wireless charging on Xiaomi turns on automatically when you first connect to a compatible station. However, sometimes you need to manually configure it. Here's how to check the current status:
- Connect your smartphone to a wireless charging station (make sure it’s on the network).
- Look at the screen: a wireless charging notification or battery icon with a wavy line should appear.
- If there is no notification, swipe down from the top edge of the screen to open the notification bar.
- If there is no information, go to Settings → Battery and check the Charging Status section.
⚠️ Note: Some models (e.g. Xiaomi) 12T Pro) wireless charging can be disabled by default due to firmware features, in which case it needs to be activated manually through hidden developer settings. If the smartphone doesn't respond to the charging station, try the following steps: 🔄 Reset the device. 🔌 Connect the station to another power source (possibly the problem in the power supply). 📱 Make sure the latest version is installed on your smartphone. MIUI (Updates often correct charging errors). ☑️ Diagnostics of wireless charging problems Check model compatibility MIUI to the latest version Use the original charging stationReboot your smartphone Check the power cable station: 0 / 5 Step-by-step: How to turn on wireless charging If your Xiaomi supports the feature but it is not activated, follow this instruction. The process may vary slightly depending on the version. MIUI, But the general pattern is the same. Method 1: Standard onset Place your smartphone on a Qi charging station (the center of the device must be the same as the center of the station). Wait for the notification to start charging. If it is not, go to Settings. → Battery and productivity → Wireless charging. Activate the switch Allow wireless charging (if any). Some firmware may require confirmation through Developer Options (about them below). Method 2: On some models (such as the Xiaomi 13 Pro with custom firmware), wireless charging is hidden in the developer menu.To open it: Go to Settings → Find the version. MIUI And you click on it 7 times in a row, and you'll get a notification that you're a developer!. Return to the main Settings menu and open the section Additional → Developer settings. Scroll down and find Wireless Charging or Charging Limitation. Make sure the feature is not disabled. ⚠️ Note: On dual-battery models (e.g. Xiaomi 11 Ultra), wireless charging may be slower due to current distribution. This is not a fault, but a design feature. What to do if there is no "Wireless Charging" item in the settings? → The battery is not wirelessly charged, meaning that your model either does not support the feature or requires a firmware update.In rare cases, the item may be hidden due to regional restrictions (e.g. on smartphones for the Chinese market). Optimization of wireless charging speed Many users note that wireless charging on Xiaomi works slower than wired. This is due to the physical limitations of Qi technology, but the speed can be increased by following several tips: Parameter Recommendation The power effect of the station Use the station at 30–50 watts (for example, Xiaomi Wireless Charger 50W) Increase speed by 20–40% The position of the smartphone Combine the center of the device with the center of the station Minimizing energy loss Temperature Charge at 10–35°C Preventing trotting the Case Use the station's thickness (fort charging speed with high battery support, also use the high battery speed) This is done to extend the battery life. To disable the restriction: Go to Settings → Battery → Battery settings. Turn off Optimized Charging or Adaptive Charging. ⚠️ Warning: Turning off optimized charging reduces battery life. Use this mode only when you need to recharge quickly. 💡If your Xiaomi supports reverse wireless charging (e.g. Xiaomi 13 Ultra), it can be used to charge other devices (earphones, smartwatches). → Battery → Reverse charging and place the gadget on the back of the smartphone. Common problems and their solutions Even on supported models, wireless charging can work unstable. Consider typical malfunctions and how to fix them: 1. The smartphone is not charged at the station 🔋 Check the power supply of the station: some models require a power supply of 18 watts and above. 📲 Update the firmware: in older versions MIUI There may be station recognition bugs. 🔄 Reboot your smartphone and station (unplug it for 30 seconds). 2. Charging is too slow. 🔥 Make sure your smartphone doesn’t overheat (optimum temperature is up to 40).°C). 🛠️ Check if the power saving mode is enabled in the battery settings. 📦 Remove the case or use thin accessories (no thickness greater than 3 mm). 3. Charging is interrupted 📍 Move your smartphone closer to the center of the station – the shift can cause communication to break. 🔌 Try another socket or power cable (possibly the problem is unstable voltage). 🔄 Turn off the function Automatic disabling charging (if it is in the firmware). If none of these methods worked, the station itself or the wireless charging module in the smartphone may have failed, in which case it is recommended to contact the Xiaomi service center for diagnosis. 💡Before visiting the service center, check the station's performance on another device (for example, on a friend's smartphone). This will help eliminate the problem with the accessory. How to choose a charging station for Xiaomi The choice of a station depends not only on the speed, but also on the safety of charging. The manufacturer recommends the use of original accessories, but there are proven alternatives: 🔌 Power: 50W models (such as the Xiaomi 14 Pro) need a station with similar power. 10-15W is enough for budget smartphones. 🛡️ Certification: Look for Qi Certified markings to guarantee compatibility and safety. 📏 Size: Stations are flat (for horizontal charging) and stand (for vertical position. 🔄 Additional features: Some models support fan cooling (good for fast charging) or multiple device charging at the same time.Among the tried-and-tested options: Xiaomi Wireless Charger 50W — official flagship station, supports vertical and horizontal position. 20W — Anker PowerWave Pad is a universal station with 10W support for most models. ⚠️ Caution: Cheap, uncertified stations can damage your smartphone battery due to unstable voltage, and it is especially dangerous to use them with models that support fast charging (over 20 watts). The manufacturer does not always advertise all the possibilities of wireless charging. Here are some little-known features that can be useful: 🔋 Reverse charging: Some models (such as the Xiaomi 13 Ultra) can charge other gadgets from your smartphone. To do this, activate Reverse Charging in the battery settings and place your headphones or smartwatch on the back. 📊 Charging statistics: In Settings → Battery → The battery status can be seen as how much power was obtained wirelessly over the last cycle. 🔇 Silent Mode: If charging notifications are annoying, you can turn them off in Settings → Sounds and vibrations → Charging notifications. ⚡ Charging priority: Some firmwares allow you to choose which type of charging (wired or wireless) takes priority when connected simultaneously. It’s also worth knowing that Xiaomi is testing remote charging technology (up to 5 meters), but it’s only available in the lab. In the future, this could be a revolutionary update for the Xiaomi ecosystem. How to speed up charging by 10% without buying a new station?If your station supports 10 watts but your smartphone is charging at 5 watts, try turning off Battery Optimization in the developer settings. To do this: Activate Developer Options (as described above). Find Background Limit and turn it off. Reboot your smartphone. This can increase charging speed but shorten battery life. FAQ: Can Xiaomi often use a thick-chase with a 3 mm battery charge? For better compatibility, choose accessories marked Qi-friendly. Why does wireless charging warm your smartphone more than wired? It's normal: when wireless power is transferred, some of the power is lost as heat. To reduce heat: Use a fan station (such as the Xiaomi 50W Cooling Pad). Charge your smartphone in a cool room. Remove the case while charging. If the temperature exceeds 45°C, the smartphone will automatically reduce the charging speed. Can Xiaomi charge at a charging station from another brand (Samsung, Mi, Das, Xiaomi 13, if the station is certified by the original Xiaomi Pro, however, the Samsung station is a charger at the 10, Xiaomi station, the battery is certified by the standard? Unique serial number (usually on the bottom sticker), accompanying documents with a hologram, you can also check the station through the official Mi Home app (if it supports Bluetooth connection), is wireless charging harmful to the Xiaomi battery? When used correctly, no. But there are nuances: ✅ Pros: No mechanical wear of the connector USB-C. ⚠️ Cons: If you overheat or use uncertified stations, the battery can degrade faster. Recommendations: Don't leave your smartphone on charge overnight. Use overheating-proof stations. Periodically calibrate the battery (discharge to 0% and charge to 100%).