The situation when your favorite track is cut off due to a discharged battery, and the case refuses to replenish energy, is familiar to many owners of wireless acoustics. It is especially frustrating when it comes to Xiaomi products, which are notorious for reliability but still subject to typical mechanical problems. TWS-Often the problem is not the battery itself, but the banal contact violation or software failure of the power controller.
Before you carry a device to a service center or write angry reviews, it is worthwhile to conduct a self-diagnosis. In most cases, about 80% of charging malfunctions can be fixed at home in 10-15 minutes without using a soldering iron. Contact oxidation and contamination of sensors are the main enemies of the stable operation of your headset.
This guide covers a wide range of models, from budget RedMi Buds to the flagship Mi True Wireless Earbuds Pro. We will analyze the algorithm of actions that will help to revive the device or accurately determine the nature of the breakdown.
Primary diagnostics and visual examination
The first step is always to have a thorough external inspection. Often users don't notice the little things that block the whole process. Take a magnifying glass or turn on a flashlight on your smartphone and carefully examine the insides of the charging case and the headphones themselves. Pay attention to the condition of the metal patches.
Sometimes the problem is the safety film, and new devices, especially the budget AirDots series, may have transparent insulation stickers on their contacts that the factory forgets to remove, which physically block the current transmission, and no amount of tambourine dancing will help until you remove them.
Also check if the headphone fits tightly into the socket. Mechanical damage to the housing or deformation of the seat can displace the device by a fraction of a millimeter, which is critical for a magnetic connector. If the earphone dangles or the magnet does not hold it, charging will not go.
⚠️ Warning: If you notice a bloated battery in the earphone or case itself (the case has spread at the seam), immediately stop charging attempts.
Cleaning contacts and eliminating pollution
The most common reason why the earphone does not charge in a case is oxidation or contamination of the contact group: earwax, skin fat and dust over time form a dielectric film on metal contacts, preventing current from passing.
To clean, you will need a cotton swab and isopropyl alcohol (or a special liquid to clean electronics).Do not use water or aggressive solvents that can damage plastic or internal electronics. Carefully, without heavy pressure, wipe the contacts on the earphone and the response pins inside the case.
It's also important to check the status of the magnets, so if they have metal shavings or dirt on them, they can keep the earpiece from snuggling tightly to the bottom of the nest, and use a dry toothbrush to remove visible contaminants from the depths of the seats.
💡
For deep cleaning of hard-to-reach places, use a wooden toothpick, carefully scraping plaque from contacts. Metal tools are best avoided, so as not to close contacts or scratch the coating.
- 🧼 Use isopropyl alcohol to degrease surfaces before cleaning.
- 🔍 Check if one of the spring-loaded contacts in the case is falling off.
- 💨 Blow the case nests with compressed air to remove dust.
Software reset and reconnection
Sometimes the hardware is good, but the software on the headset or the smartphone itself is stuck, misreading the status of the charge, and in this case, a complete reboot of the device is necessary. TWS-Xiaomi headset reset procedure often solves the problem of the “glitch” of the power controller.
To reset, place the headphones in the case and leave the lid open. Find the function button on the case case case (usually behind or inside between the sockets). Press and hold it for 10-15 seconds until the indicator flashes white or orange (depending on the model).
Once you reset successfully, you need to reset the device. Go to your Bluetooth settings on your phone, find your headphones in the list, and select Forget the device or Delete. Then search again and connect as a new device.
Emission sequence:
1. Put the headphones in the case.
2. Open the lid.
3.Push and hold the 10-15 sec button.
4. Wait for the discharge indication.
5 Remove from Bluetooth and reconnect.☑️ Headset reset algorithm
Problems with charging cable and adapter
External factors are also important. Users often sin on headphones, although the problem lies in the power supply. Xiaomi cases are sensitive to current. The use of powerful fast charging units from smartphones (for example, 65W or 120W) can cause the case controller to block charging for safety.
Try using another one. USB-Internal fractures of the wire may not provide enough voltage, even if the visual cable is intact. It is best to use the original cable from the kit or a quality cross-sectional counterpart that supports charging.
Also check the charging port itself on the case. In the Mi True Wireless Earbuds Basic 2 and its counterparts, the Micro-USB or Type-C port can slack. If the cable doesn't enter fully or dangle, the contact will disappear and the charging indicator will not light up.
⚠️ Warning: Do not use car chargers of questionable quality.Voltage surges in the vehicle's onboard network can permanently disable the case power controller.
Comparison of models and typical faults
Different headphone lines have their own design features that affect the charging process. Understanding the specifics of your model will help you find a solution faster. Below is a table with the characteristic problems of popular series.
| Model | Type of connector | Frequent problem | Decision |
|---|---|---|---|
| AirDots 1/2 | Micro-USB | Oxidation of contacts | Cleaning with alcohol |
| RedMi Buds 3 | Type-C | Failure of the | Resetting the button |
| Mi Buds 3T | Wireless. | Not getting in the center | Proper stowage |
| FlipBuds Pro | Type-C | Electric blockage | Weak power supply. |
Special attention should be paid to models with wireless charging of the case. If your Xiaomi supports Qi-charging, make sure you use a compatible base. Foreign metal objects between the case and the base (for example, the case on the phone with a magnet) can block the process.
Type-C port models are characterized by the problem of clogging the port with pile from clothing. compressed lint inside the port prevents the cable from seating fully. Use a thin non-metallic needle to gently clean the contents of the port.
When professional repairs are needed
If all of the above methods did not work, and the charging indicator does not respond at all, a hardware breakdown is likely, this can be a failure of the battery that lost capacity or “died” permanently, or a malfunction of the control board (BMS).
It is also possible to break the internal wiring inside the case, especially if the device fell from a height. TWS-Headphones are a complex process that requires soldering and micro-component skills, as batteries are often glued or soldered directly.
Should I change the battery myself?
If the device is warranty-free, do not attempt to open the case yourself.A breach of seals or autopsy marks will result in a denial of warranty service.Please contact Xiaomi's authorized center for diagnosis.
💡
If after cleaning, resetting and replacing the cable charging does not go more than 30 minutes - possible physical wear of the battery or breakdown of electronics.
- 🔋 The battery does not hold a charge for more than 1 hour after full charging.
- 🔥 Case or earphone is very heated during charging.
- 💥 The body of the device is swollen or deformed.
Prevention and proper operation
To extend your life TWS-It's important for headphones to follow the rules of operation, don't leave a case with headphones in direct sunlight or in a cold car. Extreme temperatures destroy the chemical structure of lithium batteries.
Try not to discharge the device to zero regularly. Deep discharge is bad for modern electronics. If you don't plan on using headphones for a long time, charge the case to about 60-70% and turn it off (if there is such a feature) or store it in a cool place.
Regular cleaning is the key to longevity. Once a week, wipe the contacts with dry cloth, this will prevent the accumulation of oxides, which later will have to be cleaned with difficulty, careful attitude will allow your technique to last for years without failure.