Owners of popular TWS-Xiaomi headsets often face questions about autonomy and the correctness of the energy recovery process. Redmi AirDots 2 (also known as Mi True Wireless Earbuds Basic 2) is a budget-friendly but reliable model that requires compliance with certain rules of operation for long service. The wrong charging approach can not only reduce battery capacity, but also damage the power controller.
In this article, we will discuss in detail which cables and power adapters are suitable for your device, how to decipher LED lights signals and what to do if the case has stopped responding to the connection. Proper charging is the guarantee that the headphones will please you with clean sound throughout the manufacturer's declared life.
It's important to understand that inside the case are lithium polymer batteries that are sensitive to overheating and overcharging. Although modern electronics are equipped with protection systems, using substandard power supplies can disrupt their operation. Let's look at the technical details to avoid common mistakes.
Technical characteristics of the battery and the case
To start with, it’s worth figuring out the stuffing of the device: Redmi AirDots 2 headphones themselves have 40 mAh batteries each, enough for about 4 hours of continuous listening to music or conversations, and the charging case has a built-in 300 mAh battery, allowing you to fully charge the headphones several times.
The input voltage for charging the case itself is a standard 5 volts at 500 mA (0.5 A). The use of adapters with higher current rates (for example, 2A or 3A from modern smartphones) is permissible, since the power controller will take exactly as much as it needs.
The connector is located on the front or side of the case (depending on the revision) and is made in Micro-USB format. This is an outdated but still common standard that requires the appropriate cable. The full charge cycle of the case takes about 1.5 hours, after which the device is ready to provide the headphones with energy for work for 12 hours in total.
⚠️ Warning: Do not try to charge the headphones themselves bypassing the case. In the AirDots 2 model there are no external contacts on the body of the Bud, charging occurs exclusively through magnetic pins inside the charging case compartments.
⚠️ Warning: Avoid using damaged Micro-USB cables. Poor contact can cause sparking, overheating of the connector and failure of the charge controller.
Suitable cables and power supplies
The main question that users are concerned about is: how to connect a device to the network? Because the Micro-USB connector is the de facto standard for many gadgets of the past, finding the right cable is not difficult.
It is recommended to use the original cable, which comes with a complete set, or certified analogues from well-known accessories manufacturers (for example, Baseus, Ugreen, Anker). Cheap cables "from the market" often have thin wires, high resistance and can not pass the necessary current, which will cause charging to go extremely slow or interrupted.
As for the energy source, here you have a few options:
- 🔌 Power supply from the smartphone: any adapter with output will fit USB-A and characteristics 5V/1A higher.
- 💻 USB-PC or laptop port: Allows you to charge your device while you’re working, although current there is usually limited to 0.5A.
- 🔋 Power Bank: Portable battery is a great option for charging on the road, providing stable voltage.
- 🚗 Car Charging: Adapter to the Lighter with USB-The exit will also do a great job.
Importantly, quick charging (Quick Charge, Power Delivery) is not supported in this model, and it's safe to connect the case to powerful 18W, 30W or 65W power supplies, but it doesn't charge faster. It'll take the standard 5V.
If you use a wireless charging panel (if you have the appropriate receiver on the case, which is rare for this model, but possible with external receiver stickers), make sure that it produces a standard current.
Status indication and charging process
Understanding the LED lights is key to monitoring battery health. On the front of the Redmi AirDots 2 case, there's a small LED that changes color and blinking mode depending on the situation.
When you connect the cable to a discharged case, the indicator lights up red and burns continuously, which means that there is an active process of energy storage. Once the battery of the case is 100% charged, the red light will change to white (or go out, depending on the firmware version and iron revision, but more often white).
If you put the headphones inside an open case connected to the network, the indicators on the ears themselves can also light up red, signaling the charging of internal batteries. Once removed from the case, the headphones will automatically turn on and go into pairing mode if they were not connected previously.
⚠️ Warning: If the case indicator flashes red or does not light up at all when you connect a serviceable cable, check the contacts inside the case.
Instructions: how to properly charge the device
The process of energy recovery is simple, but it requires a sequence of actions to prevent errors. First, make sure that the headphones are properly installed in their seats. The magnets must attract them and the contacts must touch them.
Then connect the Micro-USB cable to the case, and then connect the second end (USB-A) to the power supply or computer, a sequence that helps avoid power surges, although modern controllers protect against this.
☑️ Pre-charging check
If you are charging the device for the first time after purchase, it is recommended to keep it on charge for about 2 hours, even if the indicator went out earlier, this will help calibrate the battery controller and ensure that the charge level is correctly displayed later.
Don’t leave the device on charge for days or weeks unless necessary.While the protection system will prevent an explosion, a constant recharging of up to 100% can accelerate the degradation of battery chemistry.
⚠️ Attention: The case may get a little hot during charging, it's normal for you to physically process, but if the heat is strong and there's a smell of plastic, immediately turn off the device.
Elimination: Case not charging
Sometimes users are faced with a situation when the indicator does not light up. First of all, check the cable itself. Try charging another gadget with the same cable or replace the wire with a knowingly working one. Micro-USB cables often fail due to fractures at the connector.
Step two is to clean the contacts, and inside the case, at the bottom of each compartment, there are spring-loaded contacts (pins) that can become oxidized or covered with earwax over time, which prevents the earphones from being charged from the case, and gently wipe them with a dry cotton swab dipped in alcohol.
If the problem is in the case, try to rock the battery. Leave the device on charge for 30-60 minutes, even if the indicator is silent. Sometimes a deeply discharged lithium polymer battery takes time to raise the voltage to the threshold of the controller.
In rare cases, you need to reset your headphones, put them in a case and press the touch areas on both earphones simultaneously for 20 seconds (until the lights flash red several times).
Tips for extending battery life
To keep the Xiaomi Redmi AirDots 2 long-lasting, it is important to follow the rules of operation of lithium batteries. Do not allow a full discharge to zero on a regular basis. Try to put the case on charge when the indicator starts flashing red or shows about 20-30%.
Store the device at room temperature. Extreme cold or heat (such as in a car in summer or on a balcony in winter) is detrimental to the battery. The optimal temperature range for storage and operation is from +10 to +25 degrees Celsius.
If you don’t plan to use the headphones for a long time (a month or more), charge the case to about 60-70% and turn them off (put them in the case so they go to sleep). Every 2-3 months check the charge level and recharge the device to avoid deep discharge.
💡
Do not store fully discharged headphones for months. This can lead to an irreversible drop in battery capacity, and it will cease to hold charge.
Comparison of operating and charging times
For clarity, consider how long it takes for the different stages of the energy life cycle in Redmi AirDots 2. This data will help you better plan your use of the gadget throughout the day.
| Parameter | Meaning/Time | Note |
|---|---|---|
| Headphone capacity | 40mAh (each) | ~4 hours of work |
| Case capacity | 300mAh | ~3-4 full charge |
| Case charging time | 1.5 hours | Cable 5V/1A |
| Headphone charging time | 1.5 hours | From full discharge. |
| Total working hours | 12 hours | With the charges from the case |
As you can see from the table, the battery life of the device is quite sufficient for daily use, including commutes, gyms and evening walks, and the main thing is to monitor the condition of the case, which is the main source of energy.
The myth of "battery memory"
💡
The optimal mode of operation is to keep the case charged and prevent long-term storage of headphones in a discharged state.